No products in the cart.
Pool Products
Showing 1033–1056 of 1056 results
- Heat Exchangers
Waterheat
Heat exchanger suitable for warming the temperature of swimming pools and SPAS, thanks to the heat exchange between primary circuit (warm area) and the secondary one (cold area that we want to warm)
MAIN FEATURES:
– Body made in alloy of titanium (secondary, swimming pool waters)
-Coils made in alloy of titanium (primary, water from boiler)
– It can be totally equipped, casing built in ABS +, Recirculation pump and Thermostat.SKU: HS8163 - Accessories for competition equipment
Waterpolo Goal
The water polo goal is lightweight, floating and very resistant. It is built entirely from aluminium and is ovenpainted white.
Manufacturing and measurements in accordance with FINA international swimming federation standards.
• Floating: Polyurethane foam-filled aluminium floats.
• Goal frame: 80 x 50mm aluminium tube
• Net fastening: 6 mm stainless steel round rod.
• Net side pipe: 23 mm stainless steel round pipe with fastening in frame and float.
• Fastening for goal lines.
• Nets included.SKU: HS8926 - Underwater LED lighting
White Light Lamp
PAR56 LED lamp, developed to obtain maximum efficiency in electrical consumption. Use in swimming pools, where a good and homogeneous distribution of light is required.
Compatible with PAR56 projectors.
Available in the following light colors: cold white 5700K and warm white.
To properly illuminate a swimming pool, it is recommended to install a lamp of the LumiPlus V2 family every 25m² of water surface.
Note: valid recommendations for pools with light colors and for projectors with white light, oversize in RGB colors. In pools of dark colors or stainless steel it is recommended to oversize the proportion of projectors per m².
The lamps should always be installed submerged in water.
Power Consumption version V2 White DC: 32W
Power: 24Vdc
Lifespan: L70 – 50,000hSKU: HS8657 - Underwater LED lighting
White Light Lamp
PAR56 LED lamp, developed to obtain maximum efficiency in electrical consumption. Use in swimming pools, where a good and homogeneous distribution of light is required.
Compatible with PAR56 projectors.
Available in the following light colors: cold white 5700K and warm white 3000K.
To correctly illuminate a swimming pool, it is recommended to install a lamp of the LumiPlus V1 family every 20m² of water surface.
Note: valid recommendations for pools with light colors and for projectors with white light, oversize in RGB colors. In pools of dark colors or stainless steel it is recommended to oversize the proportion of projectors per m².
The lamps should always be installed submerged in water.
Power Consumption version V1 White DC: 14W
Power Consumption version V1 White AC: 14,5W 20(VA)
Power: 24Vdc (DC white light models) / 12Vac
Lifespan: L70 – 50,000hSKU: HS1672 - Underwater LED lighting
White Light Projectors
Range of LumiPlus Mini LED V2 projectors of small proportions, high light intensities and greater energy efficiency.
Thread 2 “.
Available in the following light colors: cold white 5700K and warm white 3000K.
In order to properly illuminate a swimming pool it is recommended: Install a LumiPlus Mini family focus every 5 m2 of water surface.
Note: Valid recommendations for pools with light colors and for projectors with white light, oversize in RGB colors. In pools of dark colors or stainless steel it is recommended to oversize the proportion of projectors per m2.
Power Consumption White: 4W (6 VA)
Power: 12Vac
Lifespan: L70 – 50,000hSKU: HS3177 - Underwater LED lighting
White Light Projectors
Range of LumiPlus Mini LED V2 projectors of small proportions, high light intensities and greater energy efficiency.
Installation in the niches 06967, 00369 or 49828.
Available in the following light colors: cold white 5700K and warm white 3000K.
In order to properly illuminate a swimming pool it is recommended: Install a LumiPlus Mini family focus every 5 m2 of water surface.
Note: Valid recommendations for pools with light colors and for projectors with white light, oversize in RGB colors. In pools of dark colors or stainless steel it is recommended to oversize the proportion of projectors per m2.
Power Consumption White: 4W (6 VA)
Power: 12Vac
Lifespan: L70 – 50,000hSKU: HS7343 - Underwater LED lighting
White Light Projectors
Range of LumiPlus Mini V2 projectors of small proportions, great intensities of light and greater energy efficiency.
Quick coupling, compatible with niche 53956 and 63 mm diameter bushings.
Available in the following light colors: cold white 5700K and warm white 3000K.
In order to properly illuminate a swimming pool it is recommended: Install a LumiPlus Mini family focus every 5 m2 of water surface.
Note: Valid recommendations for pools with light colors and for projectors with white light, oversize in RGB colors. In pools of dark colors or stainless steel it is recommended to oversize the proportion of projectors per m2.
Power Consumption White: 4W (6 VA)
Power: 12Vac
Lifespan: L70 – 50,000hSKU: HS2967 - Underwater LED lighting
White Light Projectors
The LumiPLus Mini V3 projectors are easy to assemble, offer a modern design and finish with stainless steel effect using IMD technology (In mold decoration) and allow the replacement of the cable quickly and easily.
Compatible with the Lumiplus Mini 53596 and 59983 niches.
Available in the following light colors: cold white 5700K and warm white 3000K.
To correctly illuminate a swimming pool, it is recommended to install a LumiPlus Mini family projector every 5 m² of water surface.
Note: Valid recommendations for pools with light colors and for projectors with white light, oversize in RGB colors. In pools of dark colors or stainless steel it is recommended to oversize the proportion of projectors per m2.
Power Consumption White: 4W (6 VA)
Power: 12Vac
Lifespan: L70 – 50,000hSKU: HS8646 - Underwater LED lighting
White Light Projectors
The LumiPLus Mini V3 projectors are easy to assemble, offer a modern design and finish with stainless steel effect using IMD technology (In mold decoration) and allow the replacement of the cable quickly and easily.
Compatible with the Lumiplus Mini 53596 and 59983 niches.
Available in the following light colors: cold white 5700K and warm white 3000K.
To correctly illuminate a swimming pool, it is recommended to install a LumiPlus Mini family projector every 5 m² of water surface.
Note: Valid recommendations for pools with light colors and for projectors with white light, oversize in RGB colors. In pools of dark colors or stainless steel it is recommended to oversize the proportion of projectors per m2.
Power Consumption White: 4W (6 VA)
Power: 12Vac
Lifespan: L70 – 50,000hSKU: HS1964 - Underwater LED lighting
White Light Projectors
The LumiPLus Mini V3 projectors are easy to assemble, offer a modern design and finish with stainless steel effect using IMD technology (In mold decoration) and allow the replacement of the cable quickly and easily.
Compatible with the Lumiplus Mini 53596 and 59983 niches.
Available in the following light colors: cold white 5700K and warm white 3000K.
To correctly illuminate a swimming pool, it is recommended to install a LumiPlus Mini family projector every 5 m² of water surface.
Note: Valid recommendations for pools with light colors and for projectors with white light, oversize in RGB colors. In pools of dark colors or stainless steel it is recommended to oversize the proportion of projectors per m2.
Power Consumption White: 4W (6 VA)
Power: 12Vac
Lifespan: L70 – 50,000hSKU: HS9892 - Underwater LED lighting
White Light Projectors
The LumiPLus Mini V3 projectors are easy to assemble, offer a modern design and finish with stainless steel effect using IMD technology (In mold decoration) and allow the replacement of the cable quickly and easily.
Compatible with the Lumiplus Mini 53596 and 59983 niches.
Available in the following light colors: cold white 5700K and warm white 3000K.
To correctly illuminate a swimming pool, it is recommended to install a LumiPlus Mini family projector every 5 m² of water surface.
Note: Valid recommendations for pools with light colors and for projectors with white light, oversize in RGB colors. In pools of dark colors or stainless steel it is recommended to oversize the proportion of projectors per m2.
Power Consumption White: 4W (6 VA)
Power: 12Vac
Lifespan: L70 – 50,000hSKU: HS6253 - Underwater LED lighting
White Light Projectors
RAPID projectors whose special feature lies in the easy assembly in the pool thanks to the connection in 1 “1/2 nozzles.
With an extra-flat front to offer an integrating design in the pool. Thanks to the adapters, it can also be installed in a Ø59 bushing or 2 “thread and in Ø63 tubes in both PN6 and PN10. You can also install it in the Lumiplus Mini 53596 and 59983 niches (only the liner model)
Available in the following light colors: cold white 5700K and warm white 3000K.
Supplied with replaceable 2 x 1mm2 cable and a length of 2.5 m.
To properly illuminate a swimming pool, it is recommended to: install a projector of the LumiPlus family
Rapid every 20 m² of water surface.
Note: Valid recommendations for pools with light colors and for projectors with white light, oversize in RGB colors. In pools of dark colors or stainless steel it is recommended to oversize the proportion of projectors per m2.
Power Consumption White: 14,5W 20(VA)
Power: 12Vac
Lifespan: L70 – 50,000hSKU: HS8895 - Underwater LED lighting
White Light Projectors
Projector wall mount. It does not require a niche and its anchoring is done through a plastic cross bracket that is included with the projector. There are two models according to the type of pool in which you want to install, model for concrete pools and model for fiber pools.
Available in the following light colors: cold white 5700K and warm white 3000K
To correctly illuminate a swimming pool, it is recommended to install a LumiPlus V1 family projector every 20m² of water surface.
Note: valid recommendations for pools with light colors and for projectors with white light, oversize in RGB colors. In pools of dark colors or stainless steel it is recommended to oversize the proportion of projectors per m².
The projectors must be installed completely submerged in water.
Power Consumption version V1 White: 14,5W 20(VA)
Power: 12Vac
Lifespan: L70 – 50,000hSKU: HS3118 - Underwater LED lighting
White Light Projectors
Projectors with PAR56 LED lamp, developed to obtain maximum efficiency in electrical consumption. Manufactured for use in swimming pools, where a good and homogeneous distribution of light is required. Available with stainless or ABS trim and in two types of anchoring: Global that is an anchoring system made entirely of plastic or STD in which the fixing is made of stainless steel.
The white light versions are powered at 24Vdc and have the power supply included and the RGB versions are powered at 12Vac by a transformer.
To complete the LumiPlus PAR56 luminaires you must purchase the niche separately. Available niches for concrete pool and prefabricated pool / liner / panels.
Available in the following light colors: cold white 5700K and warm white 3000K.
To correctly illuminate a swimming pool, it is recommended to install a LumiPlus V1 family projector every 20m² of water surface.
Note: valid recommendations for pools with light colors and for projectors with white light, oversize in RGB colors. In pools of dark colors or stainless steel it is recommended to oversize the proportion of projectors per m².
The projectors must always be installed submerged in water.
Power Consumption version V1 White DC: 14W (14VA)
Power Consumption version V1 White AC: 14,5W (20VA)
Power: 24Vdc (DC white light models) / 12Vac
Lifespan: L70 – 50,000hGlobal versions: Sea water resistant
SKU: HS3676 - Underwater LED lighting
White Light Projectors
The design of LumiPlus Design was awarded by Reddot Award 2014, which recognizes the superiority in a total of nine aspects that include innovation, functionality, ergonomics, ecology and durability.
Available in two finishes: Pure White and Inox Effect. The stainless effect is achieved thanks to the application of the innovative IMD technology (In Mold Decoration).
The lens of the LumiPlus Design projector is oriented 14º to the horizontal plane to illuminate better the background and avoid light pollution on the outside of the pool.
Available in the following light colors: cold white 5700K and warm white 3000K.
It is supplied with replaceable cable of 2 x 1.5mm2 and a length of 2.5 m.
To complete LumiPlus Design luminaires, you must purchase the niche separately. Available niches for concrete pool and prefabricated pool / liner.
To properly illuminate a swimming pool, it is recommended: Install a LumiPlus Design family bulb every 25 m2 of water surface.
Power Consumption White:The design of LumiPlus Design was awarded by Reddot Award 2014, which recognizes the superiority in a total of nine aspects that include innovation, functionality, ergonomics, ecology and durability.
Available in two finishes: Pure White and Inox Effect. The stainless effect is achieved thanks to the application of the innovative IMD technology (In Mold Decoration).
The lens of the LumiPlus Design projector is oriented 14º to the horizontal plane to illuminate better the background and avoid light pollution on the outside of the pool.
Available in the following light colors: cold white 5700K and warm white 3000K.
It is supplied with replaceable cable of 2 x 1.5mm2 and a length of 2.5 m.
To complete LumiPlus Design luminaires, you must purchase the niche separately. Available niches for concrete pool and prefabricated pool / liner.
To properly illuminate a swimming pool, it is recommended: Install a LumiPlus Design family bulb every 25 m2 of water surface.
Power Consumption White: 32 W (35VA)
Power: 12Vac
Lifespan: L70 – 50,000h
Power: 12Vac
Lifespan: L70 – 50,000hSKU: HS7792 - Mosaic
Whites
Pressed and subsequently fired vitreous mosaic. Detonation of the product.
Developed and designed to resist chemicals, frost, resistance to stains, abrasion, solar radiation, changes in temperature, zero porosity.
Due to its inalterability, easy cleaning and installation, it is ideal for covering swimming pools, wellness, interior and exterior decoration.
SKU: HS6114 - Underwater LED lighting
Wireless
LumiPlus Control Motion:Colour change CONTROL in your hand.
The LumiPlus Control Motion remote control enables wireless projector control, directly offering on/off options, 12 colour changes, 8 sequence changes and sequence speed. It also detects movement, letting you activate colours and sequences by vertical and horizontal movements, respectively. Compatible with the LumiPlus Wireless range of projectors only.
Can control 2 wireless projectors.LumiPlus Wireless Range Extender
Allows expansion of the signal that the LumiPlus Control Motion sends to the projectors with the wireless control system.
Ideal for facilities whose architectural features or projectors installation makes it hard for the LumiPlus Control Motion signal to reach the wireless projectors properly.Flexi (ABS body) V1 RGB Wireless
PAR56 V1 RGB WirelessNot compatible with stainless steel FlexiNiche projectors.
SKU: HS3575 - Automatic Covers and Reel Systems
With casing Capcir Eco model
Easy to install and to start operating, ideal for installing in existing pools. They incorporate protective casing for the covers operating mechanical unit, providing greater safety and improving the design. It is ideal for pools of up to 6 metres in width.
In the Narbonne model the motor is located inside the roller pipe itself in such a way that it is completely blended into the pool surroundings. The casing is protected by wood PVC or IPE timber.
Its main elements are a 12V, 150 Nm tubular motor with limit switch, a key switch with automatic return incorporated in the lstand cover and a switchboard with a transformer.SKU: HS9253 - Automatic Covers and Reel Systems
With casing Capcir ECO Solaire
The automatic solar cover works with solar energy and stands out as it is highly environmental. K eeps water from evaporating and reduces the loss of heat in the pool. On the other hand, it minimizes early evaporation of chemical products. Certified by the French NF 90-308 standard, the solar cover guarantees higher quality, reducing possible accidents due to children, animals, other objects falling into the pool PRECAUTIONS FOR USE: DO NOT SIT DOWN ON IT OR USE IT TO DIVE. Precautions for installation: THE SUN MUST DIRECTLY COME INTO CONTACT WITH THE PHOTOVOLTAIC PLATE. DO NO INSTAL UNDER A TRE OR FACING NORTH.
SKU: HS2349 - Pool Filtration, Pool Products
ZPM – ZETA POTENTIAL MIXER 30
30000-ZETA POTENTIAL MIXER STAINLESS STEEL DN 40, L 235 MM
30001-ZETA POTENTIAL MIXER STAINLESS STEEL DN 40, L 195 MM
30002-ZETA POTENTIAL MIXER STAINLESS STEEL DN 50, L 300 MM
30003-ZETA POTENTIAL MIXER STAINLESS STEEL DN 50, L 240 MM
30004-ZETA POTENTIAL MIXER STAINLESS STEEL DN 65, L 332 MM
30005-ZETA POTENTIAL MIXER STAINLESS STEEL DN 80, L 419.6 MM
30006-ZETA POTENTIAL MIXER STAINLESS STEEL DN 100, L 519.6 MM
30013-ZETA POTENTIAL MIXER STAINLESS STEEL DN 125, L 640 MM
30007-ZETA POTENTIAL MIXER STAINLESS STEEL DN 150, L 759.6 MM
30008-ZETA POTENTIAL MIXER STAINLESS STEEL DN 200, L 979.6 MM
30009-ZETA POTENTIAL MIXER STAINLESS STEEL DN 250, L 1219.6 MM
SKU: HS8114
