Automatic Covers and Reel Systems
Showing all 16 results
-
Automatic Covers and Reel Systems
Carlit solar model
The automatic solar pool cover Carlit runs on solar energy, making it a very environmentally-friendly product. It reduces water evaporation and heat loss in your pool. The cover also minimises premature evaporation of pool chemicals. Certified by the French standard NF 90-308, the Carlit solar pool cover guarantees higher quality, reducing possible accidents arising from children, animals, or objects falling into the water.
Precautions for installation: THE SUN MUST DIRECTLY COME INTO CONTACT WITH THE PHOTOVOLTAIC PLATE. DO NO INSTALL U NDER A TREE OR FACING NORTH.
SKU: HS2394 -
Automatic Covers and Reel Systems
Commercial roller AERIAL type
These motorized pool rollers are for pools with dimensions of up to 25 x 16 m (according to the model). It is a product that works outside the pool. They can cover pools with bubble or armed polyethylene foam covers. The option for PVC slats is not available.
AERIAL type
This roller is installed on the edge of the pool at a height of up to 3m from the ground, for the purpose of not closing off access to the pool from the roller side. Requires electrical wiring. The maximum length of the axle makes it possible to cover a pool width of 12.5 m and up to 25 metres long.SKU: HS8353 -
Automatic Covers and Reel Systems
Commercial roller BORNA type
This shaft is aimed to install on commercial indoor or outdoor swimming pools of 12.5 x 25 meters maximum. It can be used for bubble or reinforced polyethylene foam covers.The distance between the roller shaft and the pool edges must be reduced as much as possible to prevent abnormal wear and tear due to the friction on the coping.
SKU: HS6489 -
Automatic Covers and Reel Systems
Commercial roller DOUBLE AXLE type
These motorized pool rollers are for pools with dimensions of up to 25 x 16 m (according to the model). It is a product that works outside the pool. They can cover pools with bubble or armed polyethylene foam covers. The option for PVC slats is not available.
DOUBLE AXLE type
This mobile roller has two axes for two identical covers measuring 8 metres wide each. The structure is supported on 6 wheels which enable movement of the roller.SKU: HS4252 -
Automatic Covers and Reel Systems
Motor in dry mortar
The Roussillon automatic cover is the submerged model which incorporates the motor in a separate sunken compartment, and both the roller axle as well as the cover are housed at one end inside the pool itself.
The submerged zone containing the roller axle should be separated by a small concrete partition at the time of construction or with a PVC partition later on.
The basic elements for assembling the cover are the slats, the step slats, (from page 439), the mechanical kit, the embedding kit, the aluminium tie beam and the pit cover.
MECHANICAL KIT
Includes the following elements:
– Ø 146 mm extruded aluminium axle, 5 mm thick and Ø 30 mm joint shaft.
– Motor stand.
– Watertightness joints on bushing side.
– Watertightness joints on bearing stand side.
– 24 V reducer motor with stainless steel stand.
– 220/24V standard switchboard.
– On-off key switch.
Should be installed in full view of the pool. It works by continuous turning of the key.SKU: HS2567 -
Automatic Covers and Reel Systems
Motor on the shaft
The motor is integrated into the interior of the roller axle and can be installed in already existing pools of up to 6 metres in width.
As in the Roussillon model the submerged zone containing the roller axle should be separated by a small concrete partition at the time of construction or later with a PVC partition. The slat colours available for both models are white, beige and opaque blue.SKU: HS7976 -
Automatic Covers and Reel Systems
N-CARLIT
The N-CARLIT model is the perfect choice for your pool renovation and ideal for installing in existing pools. AstralPool keeps pace with new needs with the N-Carlit automatic cover, combining the safety and reliability of an automatic cover with a modern design. A new pool cover that seamlessly integrates with the pool and its surroundings. The cover is available in two finishes: a stainless steel or lacquered black and white or lacquered beige and white version. N-Carlit also comes with the choice of automatic or manual operation.
SKU: HS5384 -
Automatic Covers and Reel Systems
Slats
The AstralPool automatic cover uses hollow extrusion PVC watertight slats. The end-caps welded at both ends ensure their floatability. The 20 mm wide cap flaps can assure the total length of the slats. These flaps can also be of 10 or 30 mm, thus altering the total width of the pool cover.
The slats are 71.4 mm wide and 17 mm thick, guaranteeing their floatability. In order to avoid stains, specially organic ones, the slats are coated with calcium-zinc.
In order to best integrate the cover into the environment, you can choose from the different slat models: White, Sand, Opaque B lue, Grey, Translucent B lue* and solar captor*.The slats in translucent blue and solar captor
can only be used in Northern Europe or in areas where there is less solar radiation.
* For use only in Northern Europe. Not recommended for use below 45º latitude. For bigger widths, please enquire. ml = meter length.SKU: HS4518 -
Automatic Covers and Reel Systems
Step slats
In order to adapt to any swimming pool shape, 3 different geometric shapes are offered, thus ensuring a perfect fit to the outline of the swimming pool and maximum safety.
The available shapes are Roman steps, Straight steps and Trapezoidal steps.SKU: HS3236 -
Automatic Covers and Reel Systems
Water level motor
The submerged automatic cover Ceret is specially designed for new-built or existing pools of up to 6 metres in width. The motor, situated at water level, is integrated into the roller axle.
The submerged zone containing the roller axle can be separated by a small concrete partition at the time of construction or with a PVC partition later on.
The basic elements for cover assembly are the slats, the step slats, the mechanical kit, the embedding kit, the aluminium tie beam and the pit cover.
It has the same technical characteristics as the Roussillon model: easy to install in both existing and new-built pools. It integrates in perfect harmony with the poolÂ’s surroundings. It is also easy to maintain thanks to the motorÂ’s location, situated at water level.
The mechanics are made up of:
– Motor equipped with an end-stop system.
– 2 stainless steel brackets: bearing part and motor part with gear transmission only.
– A 220 V/24 V power supply unit with a remote key switch.SKU: HS1773 -
Automatic Covers and Reel Systems
With casing Capcir Eco model
Easy to install and to start operating, ideal for installing in existing pools. They incorporate protective casing for the coverÂ’s operating mechanical unit, providing greater safety and improving the design. It is ideal for pools of up to 6 metres in width.
In the Narbonne model the motor is located inside the roller pipe itself in such a way that it is completely blended into the pool surroundings. The casing is protected by wood PVC or IPE timber.
Its main elements are a 12V, 150 Nm tubular motor with limit switch, a key switch with automatic return incorporated in the lstand cover and a switchboard with a transformer.SKU: HS9253 -
Automatic Covers and Reel Systems
With casing Capcir ECO Solaire
The automatic solar cover works with solar energy and stands out as it is highly environmental. K eeps water from evaporating and reduces the loss of heat in the pool. On the other hand, it minimizes early evaporation of chemical products. Certified by the French NF 90-308 standard, the solar cover guarantees higher quality, reducing possible accidents due to children, animals, other objects falling into the poolÂ… PRECAUTIONS FOR USE: DO NOT SIT DOWN ON IT OR USE IT TO DIVE. Precautions for installation: THE SUN MUST DIRECTLY COME INTO CONTACT WITH THE PHOTOVOLTAIC PLATE. DO NO INSTAL UNDER A TRE OR FACING NORTH.
SKU: HS2349
