Temperature Control
Showing 1–24 of 32 results
-
Heat pumps
AC
Astral heat pumps are specifically designed for the climate in which they will be used, ensuring maximum energy gain at low air temperatures (higher COP at lower air temperatures, when maximum energy is needed)
Higher COP – Higher energy gain – Less energy costs. Astral Heat Pumps have oversized Evaporators, Double Titanium A1 Coil Heat Exchangers, Pre- charged Defrosting System;
Practical functions. Bottom-pan heating to prevent ice-formation around base of unit, waterproof display and control panel
Value: best prices on the market for the performance and quality you get: We have many years of experience in efficient production, long-lasting relationships with suppliers of quality components and low-cost distribution system.SKU: HS6779 -
Dehumidifiers and Heat Recovery
Airpool
The heat pump ASTRALPOOL model AIRPOOL is used for indoor pools dehumidification. The energy savings achieved with these devices over traditional systems of air conditioning makes it virtually indispensable when seeking to provide air conditioning in an indoor pool. The wide range of equipment
means it covers perfectly all types of facilities in the market.SKU: HS7232 -
Dehumidifiers and Heat Recovery
AirPool+
The new high performance AIRPOOL + dehumidifier is used for dehumidifying indoor pools. Thanks to its design, in which the cooling circuit components are distributed differently to conventional dehumidifiers, it uses the dehumidified air to recover heat. By optimising its various operating modes, huge savings can be made in running a pool.
SKU: HS4224 -
Heat pumps
AstralPool HEAT 3
A heat pump for outdoor pools. It comes with inverter technology and is Fluidra Connect-compatible. It has been specially designed to obtain good performance in harsher climates. In addition, it runs in power-saving mode to achieve better energy efficiency, makes less noise than other heat pumps and can be used all year
around.
Technical features:
• Inverter technology, which automatically changes the power setting so that the heat pump runs at optimum efficiency levels.
• Fluidra Connect-compatible through a Modbus connection to the Fluidra Connect platform.
• A soft starter prevents current surges when the compressor starts up.
• Lowest outdoor air working temperature of -20 ºC, designed to work in cold climates.
• The reverse cycle defrosting system makes defrosting faster.
• Heating and cooling modes, thanks to the four-way valve.
• Electronic expansion valve for enhanced COP performance.
• R-32 refrigerant gas, free of agents that damage the ozone layer.
• ABS plastic housing, which prevents corrosion.
• Titanium exchanger with twisted tube for enhanced performance.
• High- and low-pressure flow meter and pressure switch.
• Modbus-compatible.
• Touchscreen.
Accessories included: Winter cover, anti-vibration brackets, drainage connection, screen watertight box, 10m screen connection cable, hydraulic connection fittings and Modbus signal cable.SKU: HS2879 -
Heat pumps
AstralPool Heat II
The AP Heat II Air/Water heat pump has been designed to heat both pools and hot tubs. Thus, by taking advantage of the free calories in the air, pools can be heated to lengthen the swimming season cheaply. The AP Heat II by AstralPool is without a doubt the best performing heat pump on the market.
Performance:
• Robust and light ABS casing resistant to sunlight.
• R-407C refrigerant gas (environmentally friendly).
• Heats pools and/or hot tubs.
• Easy-to-use multi-lingual control panel with display of actual temperature and default setting; alarm messages (delays, timer settings, defrosting, etc.).
• Works at outdoor temperatures starting at 5ºC.
• Two defrosting cycles in all models: forced draught or induced.
• Pressure switch to control water flow, external gauge to control condensation and optimum flow regulation.
• Modbus communication.
EOM energy-saving mode: shows the pump’s energy performance while it is working. The electronic card reads parameters and sensors to calculate the right settings and adjust them for optimum performance in each installation.
Wireless remote control: for total control of the heater so that it can be switched on and off, the heat or cooling mode selected (optional), the ECO and EOM modes activated, the pool or hot tub heated (optional), the default value modified, the pool and outdoor temperature read, alarm messages received and the flow signal displayed.
Alarm history report and diagnosis of failures: so that technical assistance is more effective and information about the heater available in any place.SKU: HS3953 -
Dehumidifiers and Heat Recovery
BDP CONFORT dehumidifier
MAXIMUM COMFORT
The BDP COMFORT dehumidifier is used to dehumidify indoor pools, by taking advantage of the latent heat of vaporisation and the equipment performance itself to heat the pool air.
The energy savings that are achieved with this equipment over traditional climate control systems makes it practically essential for indoor pool climate control.
The wide range of equipment makes it so that all types of installations that exist on the market are perfectly covered.
MODELS:
· BDP-5 AIR/LOW AIR SILHOUETTE 5 l/h. Dehumidification Capacity.
· BDP-6 5.9 l/h. Dehumidification Capacity.
· BDP-8 8.3 l/h. Dehumidification Capacity.
· BDP-10 11 l/h. Dehumidification Capacity.
· BDP-12 12.5 l/h. Dehumidification Capacity.
· BDP-16 17.35 l/h. Dehumidification Capacity.SKU: HS9838 -
Dehumidifiers and Heat Recovery
CDP LINE 2
The new CDP LINE dehumdifier console is used in installations where individual humidity and temperature control of the area is required. It takes advantage of the latent heat of porisation and the equipment performance itself in heating the room air of small pools, tubs, changing rooms and bathrooms.
· Monoblock evaporation and condensation battery made out of copper pipes with laquered aluminium fins (specially designed for corrosive environments).
· Airtight compressor with an internal protection mechanism, carter resistance and a muffler.
· A cooling circuit of nitrogenated, dehydrated, deoxidised copper.
· Optional heating battery, electrical or hot water.
The new innovations this equipment introduces include the expanded polypropylene structure (EPP) which reduces it weight and the level of noise.SKU: HS2836 -
Heat pumps
ELYO SMART NN
ELYO SMART heat pumps heat or cool (up to a maximum of 20 ° C) private outdoor swimming pools up to 130 m3. These environmentally friendly air-to-water heat pumps transmit energy from the outside air to the pool water.
Economical, they restore between 4 and 5 times the energy they consume. Operate down to an outside temperature of -5 ° C.
With its thermoplastic resin body on a metal frame and its protected control box, they are perfectly resistant to bad weather and UV rays. Very quiet and easy to use.
• Large evaporator with hydrophilic finish for better performance capacity.
• Axial fan.
• Defrost by cycle inversion (4-way valve).
• TOSHIBA or PANASONIC compressor depending on the model (see table of characteristics).
• Titanium heat exchanger with high pressure tube (20 bars), “twisted” larger contact surface and better efficiency in a PVC heating body.
• Full charge of R410A gas, ecological.
• Filtration control, heating priority for better comfort.
• High reliability integrated flow sensor (paddle sensor).
• Waterproof electrical box for better component protection.
• Ease of installation thanks to exterior access to electrical connections.
• Easy-to-use digital display with a programming clock.
• Remote wired display at 10m (wire supplied).
• Winter drain accessible from the outside. Surface mounting box supplied.
• Included TiltWatch, overturn indicator. The indicator on the packaging turns red, if the carton has been coated.
• Supplied with Silent-Bloc condensate drain pipe and a protective cover.
• Power available from 9 kw Mono to 28 kW Tri.SKU: HS4598 -
Heat Exchangers
Etna plate exchanger series
Equipment available in three options: basic model, equipped model (with three-way valves and control) and model equipped with recirculating pump.
Available power from 15000 to 580500 kcal/h. Corrugated plates in AISI 316 or titanium.
In equipped exchangers, complete control with control of the purifying pump.SKU: HS6499 -
Heat pumps
EvoLine
Air/water heat pump to heat you pool in the cheapest possible way. Private pools up to 80 m3. This technology makes it possible to extend the swimming season to enjoy your pool more months of the year. Its ability to extract air energy means it ca obtain up to 5 times the energy it consumes, delivering low consumption and
making it more environmentally friendly.
· The heat pump with the best quality/price ratio in the market.
· EVOLine is especially designed for the climates where it will be used, ensuring great energy savings for low temperatures.
· The greater the COP, the bigger the energy saving and the lower the energy costs. EVOLine pumps have oversized parts such as: Evaporator and Titanium A1 two coil exchanger.
· Electrical resistance on bottom tray to prevent ice from forming on the base of the unit
· Free app ready to download to control the heat pump via wifi.
· Reverse cycle defrosting.
· R410A refrigerant.
· Minimum air working temperature 0ºC.
· Heat and cold regulation to keep temperature steady.
· ABS housing.
· Digital control, leak-tight control box.
· High and low pressure pressure switch.
· Winter cover includedSKU: HS9473 -
Heat pumps
EVOLine NN
• 8 power levels from 4.5 kW to 32.3 kW*.
• Smooth and quiet performance down to 0°C outdoor air temperature.
• Heating and Cooling regulation.Technical features:
• Detachable display.
• Heating priority mode (filtration pump control).
• ABS plastic housing.
• AC fan.
• Automatic cooling mode.
• Automatic defrosting.
• HP & LP safety pressure switch.
• Water flow switch.
• Titanium water exchanger condenser.
• Scroll compressor.
• Electronic expansion valve.Accessories included:
• 1 x Winter Cover.
• 4 x Adjustable anti-vibration feet.
• 2 x Water nozzles.
• 1 x inlet/outlet position instruction.
• 1 x 10m Signal wire (to connect the screen remotely).
• 1 x screen waterproof box (to replace the remote screen on the Heat Pump).
• 1 x plate cover to support the display on the wall.
• 2 x PVC fittings Ø 1.5 inch.SKU: HS4653 -
Heat pumps
Maya
MAYA – For heating the water in residential and public pools
ldeal for public swimming pools or pool complexes in hotels and campsites.
Air-water heat pump with centrifugal fans. Wall-mounted model with a monobloc design.
It requires a free outside air inlet and a discharge duct for releasing cold air to the outside.
Available in two types of finish: painted sheet metal or magnesium aluminium.
Hermetic compressor with silencer.SKU: HS7421 -
Heat pumps
Optima
Either heats or chills the water depending on the needs.
·Compact design model in aluminium for outdoor installation, resistant to corrosive environments.
·Evaporating battery (air-water exchanger) built with copper tubing which includes tempered aluminium fins specially designed for corrosive surroundings.
·Axial fan.
·Reciprocating compressor or scroll.
·Titanium condensers.
·Filled with gas Freon R407C with low ecological impact.
·A cooling circuit made of heavy wall copper tubing, processed to repel rust.
·Low and High Pressure (LP/HP) mini-pressure switches with manual reset.
·Expansion valve with pressure equaliser.
·Dehydrating fi lter.
·Hydraulic circuit with flow switch at the water inlet, solvent socket connections in PVC. Standard connections are in metric system. Other standards could also be available by request.
·Electrical control panel for complete process control and digital high-sensitivity regulation to guarantee optimum performance with minimum power consumption at all times.
·II/230V/50Hz – III/400V/50Hz depending on the model. Available in other electrical configurations, voltages and frequencies by request.SKU: HS4418 -
Heat pumps
Pro Elyo Touch
• Full inverter technology: silent and energy saving.
• 8 power levels from 8.5 kW to 35 kW*.
• – 20°C lowest outdoor air working temperature.*Temperature conditions of 28°C Air / 28°C Water
Technical features:
• New, wide LED touchscreen.
• Optional remote control kit.
• Heating priority mode (filtration pump control).
• ABS plastic housing with new injected fan grid; galvanized steel protection grid around the evaporator.
• DC, variable speed fan.
• Automatic cooling mode.
• Automatic defrosting.
• HP & LP safety pressure switch.
• Water flow switch.
• Titanium water exchanger condenser.
• Inverter Rotary compressor.
• Electronic expansion valve.Accessories included:
• 1 x Winter Cover.
• 4 x Anti-vibration feet.
• Condensate drainage kit.
• 1 x remote display kit (including 10m extension cable).
• 1 x 10m Modbus Signal wire (to connect the heat pump to the Connect Box).
• 2 x PVC fittings 1/2 union Ø 50.Optional accessories:
• Remote display kit. Code: 74199.SKU: HS2875 -
Heat pumps
Pro-Elyo Inverter
Air/water heat pump for heating pools with inverter technology. Private pools up to 80 m3. Inverter technology enables a heat pump to work on the power it needs depending on demand. This increases a facility’s efficiency, makes it less noisy and it consumes less.
· The Pro-Elyo Inverter has been specially designed to work in temperatures as low as -10 ºC.
· The inverter technology makes it possible to heat a pool with less noise and at a lower cost.
· Its COP is up to 30% greater than a conventional heat pump.
· It has 3 operating modes: powerful, smart and quiet.
· Reverse cycle defrosting
· Electronic expansion valve.
· R-407A refrigerant
· Heat and cold regulated to keep a constant temperature
· ABS housing
· High and low pressure flow meter
· Winter cover included.SKU: HS6238 -
Heat pumps
ProHeat II
PROHEAT II heat pump air/water is suitable for outdoor pools. It will allow you to extend the use of the pool in the summer season.
• Robust, lightweight casing made from corrosion-resistant magnesium coated aluminium.
• High performance evaporator battery in an inner corrugated copper tube with lacquered aluminium fins, especially for corrosive environments.
• Axial ventilator.
• Scroll compressor.
• Water condensers in G2 titanium. Guaranteed against corrosion.
• R-410A refrigerant gas.
• Expansion by thermostatic valve with external balancing unit.
• High and low pressure switches.
• Flowmeter for controlling condensation.
• Reverse cycle defrosting with 4-way valve.
• Control of purifying system.
• Electrical protection for handling and strength.
• Easy-to-use control panel with current temperature display and set point, and alarm notifications. Communication protocols are available.Fluidra Connect-compatible through a Modbus connection to the Fluidra Connect platform.
SKU: HS1876 -
Heat pumps
Proheat II CHILLER
The PROHEAT II CHILLER is used for heating swimming pools even with 0ºC in air, extending the swimming season.
• Robust, lightweight casing in Aluminium and Magnesium sheet anti-corrosion, Aluminium structure. Not degradable color.
• High performance evaporator coil made of copper tube and lacquered aluminium fins, especially for corrosive environments.
• Axial fans.
• Compressor Scroll.
• Titanium condensers made of Titanium G2 and PVC against corrosion.
• Refrigerant Gas R-410-A.
• High and Low pressure switches (HP/LP).
• Expansion by thermostatic valve with external balancer.
• Reversible cycle for defrosting by 4-way valve.
• Dry filter bidirectional.
• Water circuit made of PVC with wa-ter flow switch.
• Filter pump control.
• Automatic electrical protections.
• Easy-to-use control panel, with display of current temperature, setpoint and alarm messages.SKU: HS6194 -
Heat pumps
Proheat II Indoor
The PROHEAT II INDOOR is used for heating swimming pools even with 0ºC in air, extending the swimming season. In addition, it’s main feature is the energy saving thanks to the “A” energy class.
Fluidra Connect-compatible through a Modbus connection to the Fluidra Connect platform.
SKU: HS8434 -
Heat pumps
TOP+
The most inexpensive air-water heat pump for heating pools.
For residential pools of up to 36 m3.
This technology makes it possible to extend the swimming season so that pools can be used for longer during the year. Its capacity for extracting energy from air enables it to obtain 5 times more energy that it consumes. It is therefore low on power consumption and high on eco-friendliness.SKU: HS2655 -
Heat Exchangers
Waterheat
Heat exchanger suitable for warming the temperature of swimming pools and SPAS, thanks to the heat exchange between primary circuit (warm area) and the secondary one (cold area that we want to warm)
MAIN FEATURES:
– Body made in alloy of titanium (secondary, swimming pool waters)
-Coils made in alloy of titanium (primary, water from boiler)
– It can be totally equipped, casing built in ABS +, Recirculation pump and Thermostat.SKU: HS8163 -
Pool Products, Temperature Control
AIR COOLED WATER CHILLER
• Touch design LCD control display and control signal are easier to be transferred to control system with BMS.
• Clock& Timing on/off function
• Phase monitor: Protects the compressor in case of phase loss or inversion
• High/low pressure protection available
• cooled water temperatureSKU: HS9317 -
Pool Products, Temperature Control
ELECRO EVOLUTION 2 ALL TITANIUM
• Ten power options ranging from 1-kW to 24-kW
• Easy installation, fully equipped and pre-wired
• Robust, durable construction
• Ultra-reliable flow switch allows safe operation
• Temperature thermostat and overheating sensor
• Compact, durable design
• Analogue control with 1.2°C differential or digital control With 0.5°C differential and selectable multi-lingual display
• Titanium flow tube and titanium heating element
• Can be floor or vertically wall mounted
• Vortex, long life, stay clean heating element technology
• 100% efficiency throughout the product life
• Silent operationSKU: HS4597 -
Pool Products, Temperature Control
G2 HEAT EXCHANGER
G2-HE-30T/G2 HEAT EXCHANGER – TITANIUM TUBE BUNDLE, 30 KW 102K BTU
G2-HE-49T/G2 HEAT EXCHANGER – TITANIUM TUBE BUNDLE, 49 KW 167K BTU
G2-HE-85T/G2 HEAT EXCHANGER – TITANIUM TUBE BUNDLE, 85 KW 290K BTU
G2-HE-122T/G2 HEAT EXCHANGER – TITANIUM TUBE BUNDLE, 122 KW 416K BTU
SKU: HS2289 -
Pool Products, Temperature Control
HEAT SMART & KOOL SMART PLUS
• Smart touchscreen display
• BMS (Building Management System) IntegrationReady
• Multi-lingual interface
• Programmable 24-hour time clock (4 time zones)
• Flow and temperature sensor ports
• Accurate control to 0.5ºC
• Diagnostic displaySKU: HS8661