No products in the cart.
Centrifugal pumps
ARAL C 1500 Pump
Monobloc horizontal centrifugal pumps with a horizontal volute and a attached pre-filter with an stainless steel AISI-304 basket. Appropiate for public swimming pools and clean liquid recirculation. 1450 r.p.m. high performance pumps with the body, impeller, pre-filter and bracket manufactured in cast iron. The shaft is made of stainless steel AISI-316 with bronze protection, and the mechanic seal is made of stainless steel AISI-316. The motor holds an IP-54 protection. The gamma ranges from triphasic 3 HP to 25 HP motors. Such motors have a 230/400/690V 50Hz working voltage (60 hz could also be supplied). Hub by flange according to DIN-2501 regulation.
According the Energy Efficiency regulation class IE2
Compare
| Code | Description | ||
| 01208 | 2.20 kW (3 HP) Suction DN 65-21/2” for Ø 75 mm pipe Discharge DN 50-2” for Ø 63 mm pipe 230/400 V III | ||
| 01209 | 3 kW (4 HP) Suction DN 80-3” for Ø 90 mm pipe Discharge DN 65-21/2” for Ø 75 mm pipe 230/400 V III | ||
| 01210 | 3 kW (4 HP) Suction DN 80-3” for Ø 90 mm pipe Discharge DN 65-21/2” for Ø 75 mm pipe 400/690 V III | ||
| 01211 | 4 kW (5.5 HP) Suction DN 80-3” for Ø 90 mm pipe Discharge DN 65-21/2” for Ø 75 mm pipe 230/400 V III | ||
| 01212 | 4 kW (5.5 HP) Suction DN 80-3” for Ø 90 mm pipe Discharge DN 65-21/2” for Ø 75 mm pipe 400/690 V III | ||
| 01213 | 5.5 kW (7.5 HP) Suction DN 80-3” for Ø 90 mm pipe Discharge DN 65-21/2” for Ø 75 mm pipe 230/400 V III | ||
| 01214 | 5.5 kW (7.5 HP) Suction DN 80-3” for Ø 90 mm pipe Discharge DN 65-21/2” for Ø 75 mm pipe 400/690 V III | ||
| 01215 | 5.5 kW (7.5 HP) Suction DN 100-4” for Ø 110 mm pipe Discharge DN 80-3” for Ø 90 mm pipe 230/400 V III | ||
| 01216 | 5.5 kW (7.5 HP) Suction DN 100-4” for Ø 110 mm pipe Discharge DN 80-3” for Ø 90 mm pipe 400/690 V III | ||
| 01217 | 7.5 kW (10 HP) Suction DN 100-4” for Ø 110 mm pipe Discharge DN 80-3” for Ø 90 mm pipe 230/400 V III | ||
| 01218 | 7.5 kW (10 HP) Suction DN 100-4” for Ø 110 mm pipe Discharge DN 80-3” for Ø 90 mm pipe 400/690 V III | ||
| 01219 | 9.20 kW (12.5 HP) Suction DN 125-5” for Ø 140 mm pipe Discharge DN 100-4” for Ø 110 mm pipe 230/400 V III | ||
| 01220 | 9.20 kW (12.5 HP) Suction DN 125-5” for Ø 140 mm pipe Discharge DN 100-4” for Ø 110 mm pipe 400/690 V III | ||
| 01221 | 11 kW (15 HP) Suction DN 125-5” for Ø 140 mm pipe Discharge DN 100-4” for Ø 110 mm pipe 230/400 V III | ||
| 01221-1800 | BOMBA 1450 CENTRIF FE 15 CV 230/400 V 3- | ||
| 01222 | 11 kW (15 HP) Suction DN 125-5” for Ø 140 mm pipe Discharge DN 100-4” for Ø 110 mm pipe 400/690 V III | ||
| 01222-1800 | BOMBA 1450 CENTRIF FE 15 CV 400/690 V 3- | ||
| 01223 | 15 kW (20 HP) Suction DN 150-6” for Ø 160 mm pipe Discharge DN 125-5” for Ø 140 mm pipe 230/400 V III | ||
| 01223-1800 | BOMBA 1450 CENTRIF FE 20 CV 230/400 V 3- | ||
| 01224 | 15 kW (20 HP) Suction DN 150-6” for Ø 160 mm pipe Discharge DN 125-5” for Ø 140 mm pipe 400/690 V III | ||
| 01224-1800 | BOMBA 1450 CENTRIF FE 20 CV 400/690 V 3- | ||
| 01225 | 18.40 kW (25 HP) Suction DN 150-6” for Ø 160 mm pipe Discharge DN 125-5” for Ø 140 mm pipe 230/400 V III | ||
| 01225-1800 | BOMBA 1450 CENTRIF FE 25 CV 230/400 V 3- | ||
| 01226 | 18.40 kW (25 HP) Suction DN 150-6” for Ø 160 mm pipe Discharge DN 125-5” for Ø 140 mm pipe 400/690 V III | ||
| 01226-1800 | BOMBA 1450 CENTRIF FE 25 CV 400/690 V 3- |
Reasons to buy from helloshoponline
- Guaranteed quality
- Careful handling
- On time delivery
- Support
- Telephone support
- Live chat support
- Trained staff
If you have questions or feedback about an order or plant care here’s how to contact:
- Email :info@helloshoponline.ae
- Phone:+971 50 5454 589
| Brands |
|---|
Related products
- Centrifugal pumps
Fiji Pump
• Fiji is a high performance pump designed for above ground pools, working under a vast range of conditions whilst delivering the requested fl ow and pressure.
• The Fiji pump features a see-through lid for easy inspection, easy-to-remove drain plugs and a large strainer to extend the time between cleaning.
• The motor materials are rustproof with a stainless steel motor shaft and sealed bearings that never need lubrication.
• The thermoplastic housing is built to withstand extreme heat and resist corrosion.
• Single phase motors are available from 0,18 Hp up to 0,3 Hp.
• A pre-fi lter has been added to prevent the entry of any foreign bodies which could cause damage to the hydraulic parts of the pump.
• Fiji is quiet due to its innovative hydraulic design.
• Every Fiji pump is performance and pressure tested prior to shipment to ensure superior quality.
• TUV GS certifi ed.SKU: HS2662 - Centrifugal pumps
P-XPERT Pump
The body of the pump is made of the latest generation thermoplastics. The pumps are centrifugal and range from 150 W, 340 W, 490 W, 600 W, 640 W, 790 W and 1030 W and are provided with single-phase motors. A pre-filter has been integrated into the body of the pump to prevent the entry of any fo-reign bodies which could cause damage to the hydraulic parts of the pump.
The motors supplied with the motor pump unit have been protected with IP-X4 protec-tion and are adapted to withstand hot at-mospheres and high humidity levels.
SKU: HS8215 - Centrifugal pumps
COLORADO Pump
· Centrifugal High Flow Plastic pumps at 3000 rpm. · Electropumps for swimming pools, with or without prefilter, ideal for high flow at low pressure. · Prefilter with transparent lid. Fixing by butterfly nut. Easy accessibility. · Pump body and prefilter made in polypropylene reinforced with fibre glass. · Bronze impeller. · Pump shaft and prefilter basket in stainless steel. · Motors with IP-55 protection, 3000 r.p.m., 230/400 V or 400/690 V, and 50Hz. · From 7.5 HP to 12.5 HP.SKU: HS5836 - Centrifugal pumps
MAXIM Pump
High performance centrifugal MAXIM pump has been developed for public swimming pools. Entirely manufactured in technical plastics, which guarantee a longer service life. It includes a 8 liter capacity pre-filter, with a particular wrench which allows an easy access to the pre-filter basket. Three versions are avaiable, with 3.5 HP, 4.5 HP and 5.5 HP triphasic motors. Such motors have a dual working voltage, 230V/400V, and endure oscillations between +/- 10%. This pump has obtained the GS certification, awarded by TÜV Product Service, thanks to his quality.According the Energy Efficiency regulation class IE2.
SKU: HS2612
