ASTER filter – high quality of filtration
The filters are manufactured with polyester resin and fibreglass.
. The highness filtering layer is of 0,8m, That gives a mayor quality of filtration than the residential filter this increases the capacity withholding the litle particles.
. Prolongs the time saturation filtration of the layers saving energy consumption, water consumption and chemical products.
. The filter can be used as a single layer or multi layer combine sand with gravel, glass or antracite.
. Fast opening lid.
. Sand drain of 2 1/2″ in the bottom part of thefilter.
. Optional sand drain d.200mm.
. Maximum pressure 2,5Bar.
. Optional interior finishing with vinylester for ozone treatment.
. Maximum temperature of 40º./n
| Code | Description | ||
| 10003-0100 | Ø 900 mm output 2″ | ||
| 10004 | Ø 900 output 21/2″ | ||
| 24768-0100 | Ø 500 mm output 11/2″ | ||
| 24769-0100 | Ø 600 mm output 11/2″ | ||
| 24770-0100 | Ø 750 mm output 2″ |
RELATED
Reasons to buy from helloshoponline
- Guaranteed quality
- Careful handling
- On time delivery
- Support
- Telephone support
- Live chat support
- Trained staff
If you have questions or feedback about an order or plant care here’s how to contact:
- Email :info@helloshoponline.ae
- Phone:+971 50 5454 589
| Brands |
|---|
Related products
-
Sand Filters
BILBAO filter
• Body made in two parts, injected with polypropylene (PP)
and reinforced with fi berglass.
• Stainless steel fl ange closing and anticorrosive treatment.
• With pressure gauge and manual air relief – water purge
valves.
• This body in two parts allows an easier change of sand.
• Valve sold separately.
• Maximum pressure of 1,5 Kg/cm2.SKU: HS1521 -
Sand Filters
ARTIC PLUS filter
· Laminated filter in polyester with fibreglass totally anticorrosive.
· High performance filter with filtration bed height of 1,2 m.
· Maximum working pressure: 2,5 bar.
· collector arms system made of PP with 0,3 mm slots, uniformly distributed in order to achieve a correct circulation of the water.
· D200 mm filter lid in injected plastic for models of diameter 650, 800 and 950 mm, and D400 mm lid for models of diameter 1050 and 1200 mm, with AISI-316 stainless steel screws.
· Gaskets in EPDM.
· Equipped with pressure gauge in filter lid, manual water and air purge, and D200 mm sand discharge.
· Filter base made of reinforced PP.
· Internal piping and fi ttings in PVC.
· ACME threaded connections for models of diameter 650, 800 and 950 mm. Flange connections for models of diameter 1050 and 1200 mm. Standard connections are in metric system. Other standards could also be available by request.
· Maximum water temperature: 50 ºC.
· Very important: please notify if the installation will use sea water, if the backwash is done with air or with air/water and if the installation is outside.
OPTIONS
· Interior coating of vinylester resistant to ozone, up to 0,4 ppm for a temperature of 40ºC.
· Nozzle plate system: nozzle plate made of polyester reinforced with fibreglass, with nozzles made of PP with 0,5 mm slots, uniformly distributed with a density of 60 units/m2.
· Eastar copolyester sight glass.
· D400 mm manhole in models of 1050 and 1200 mm diameter.SKU: HS9121 -
Sand Filters
OLOT filter
Features: According to DIN 19605/19643 Standard
Collector system:
Nozzle plate with 0.5 mm slots, working pressure 2.5 bar.
Fitted with:
– Pressure gauge panel
– Manual air vent and water purge
– Air wash connection flange
– Ø 400 mm manhole
Options:
– Positioning of water connection flanges, sightglasses and manhole covers are provided according to customer
specifications.
– Diameters of connections and purges depend on customer specifications.
– Please enquire for the variations such as height, chemical resistant internal coating, pressure rating, etc…SKU: HS3913
