No products in the cart.
Sand Filters
ASTER filter
Beige laminated polyester and fibreglass body with boltless lid and polypropylene base. Equipped with pressure gauge, water drainage plug, and multiport valve. Maximum working pressure: 2,5 kg/cm2. Filtration velocity: 50 m3/h/m2.
CHARACTERISTICS:
– Sand filters, laminated with polyester/fibreglass resin. Comes in gray Ral 7038.
– Equipped with collectors of 1″ diameter and diffuser of highly resistant PVC and PP plastic.
– Fitted with pressure gauge, manual air and water purge valves.
– Side-mount 6-way multiport valve with filter, backwash, rinse, recirculate, waste and closed.
– Polypropylene base.
– Screwless cover for quick opening and closing. – Maximum flow rate: 50 m3/h/m2.
– Maximum operating pressure: 2,5 kg/cm2.
ADVANTAGES:
– Easy handling: A patented system is used for opening and closing the cover, thereby eliminating the use of traditional screws. The system also exerts uniform pressure over the entire watertight joint and makes it easier to loosen the cover.
– Capacity: 1″ collectors increase the filtering surface and improves efficiency.
– Functionality: Fitted with an AstralPool multiport valve with 6+1 positions for filter, backwash, rinse, recirculate, waste and closed. A valve so reliable, it’s used with most AstralPool filters.
MONOBLOC:
Aster filters of diameter 350, 450 or 600 mm are available in monoblocs composed of a polypropylene base, filter with side-mount selector valve, selfpriming Sprint pump and all the necessary fittings. Characteristics:
– The monoblocs include a base constructed of weather-resistant plastic.
– All components are designed for easy assembly and precise fitting.
– Comes as a pre-assembled unit.
Compare
| Code | Description | ||
| 00497 | Side filter 5,000 l/h Ø350 mm outlets 1½” | ||
| 00497-0100 | Side filter 5,000 l/h Ø350 mm outlets 1½”. Multiport valve not included | ||
| 00497AN | Side filter 5,000 l/h Ø350 mm outlets 1½” | ||
| 00498 | Side filter 8,000 l/h Ø450 mm outlets 1½” | ||
| 00498AN | Side filter 8,000 l/h Ø450 mm outlets 1½” | ||
| 00499 | Side filter 14,000 l/h Ø600 mm outlets 1½” | ||
| 00499AN | Side filter 14,000 l/h Ø600 mm outlets 1½” | ||
| 00500 | Side filter 21,000 l/h Ø750 mm outlets 2” | ||
| 00501 | Without valve 31,000 l/h Ø900 mm connections 2½” | ||
| 08133 | Side filter 32,000 l/h Ø900 mm connections 2” | ||
| 19781 | Side filte 9.000 l/h Ø500 mm outlets 1½” | ||
| 19781-0100 | Side filter 9,000 l/h Ø500 mm outlets 1½”. Multiport valve not included | ||
| 21071 | Side filter 15,000 l/h Ø650 mm outlets 1½” | ||
| 28479 | Side filter 18,000 l/h Ø680 mm outlets 1½” | ||
| 30768 | Top filter 5,000 l/h Ø350 mm outlets 1½” | ||
| 30769 | Top filter 8,000 l/h Ø350 mm outlets 1½” | ||
| 30770 | Top filter 9.000 l/h Ø500 mm outlets 1½” | ||
| 30771 | Top filter 14.000 l/h Ø600 mm outlets 1½” | ||
| 30772 | Top filter 15,000 l/h Ø350 mm outlets 1½” | ||
| 32706 | Top filter 12,000 l/h Ø350 mm outlets 1½” | ||
| 33847 | Top filter 21.000 l/h Ø750 mm outlets 2” | ||
| 33848 | Top filter 21.000 l/h Ø900 mm outlets 2” | ||
| 40964 | Side filter 25,000 l/h Ø800 mm outlets 2” | ||
| 40965 | Side filte 35.000 l/h Ø950 mm outlets 2” |
RELATED
Reasons to buy from helloshoponline
- Guaranteed quality
- Careful handling
- On time delivery
- Support
- Telephone support
- Live chat support
- Trained staff
If you have questions or feedback about an order or plant care here’s how to contact:
- Email :info@helloshoponline.ae
- Phone:+971 50 5454 589
| Brands |
|---|
Related products
- Sand Filters
ARTIC PLUS filter
· Laminated filter in polyester with fibreglass totally anticorrosive.
· High performance filter with filtration bed height of 1,2 m.
· Maximum working pressure: 2,5 bar.
· collector arms system made of PP with 0,3 mm slots, uniformly distributed in order to achieve a correct circulation of the water.
· D200 mm filter lid in injected plastic for models of diameter 650, 800 and 950 mm, and D400 mm lid for models of diameter 1050 and 1200 mm, with AISI-316 stainless steel screws.
· Gaskets in EPDM.
· Equipped with pressure gauge in filter lid, manual water and air purge, and D200 mm sand discharge.
· Filter base made of reinforced PP.
· Internal piping and fi ttings in PVC.
· ACME threaded connections for models of diameter 650, 800 and 950 mm. Flange connections for models of diameter 1050 and 1200 mm. Standard connections are in metric system. Other standards could also be available by request.
· Maximum water temperature: 50 ºC.
· Very important: please notify if the installation will use sea water, if the backwash is done with air or with air/water and if the installation is outside.
OPTIONS
· Interior coating of vinylester resistant to ozone, up to 0,4 ppm for a temperature of 40ºC.
· Nozzle plate system: nozzle plate made of polyester reinforced with fibreglass, with nozzles made of PP with 0,5 mm slots, uniformly distributed with a density of 60 units/m2.
· Eastar copolyester sight glass.
· D400 mm manhole in models of 1050 and 1200 mm diameter.SKU: HS9121 - Sand Filters
MILLENNIUM filter
One piece blow-moulded filters made in plastic with threaded lif, multiport valve, pressure gauge and manual air vent and water purge. Ivory colour. Maximum working pressure: 2 kg/cm2.
CHARACTERISTICS:
– Available with side mount or top mount, to adapt to the particular characteristics and available space at each pool site.
– Filter body manufactured of chemical and weatherresistant, inalterable plastic. Designed for outdoor use.
– Standard equipment with next-generation 1 1/2″, 6+1 multiport valve from AstralPool with bayonet closure for filter, backwash, rinse, recirculate, waste, close, and winter operations (all inlets and outlets are connected).
– Transparent lid for easier visual inspection and access to the inside of the filter in side-mount valves.
– Top diffuser to ensure good water distribution above the filtering bed. – Inner 1 1/2″ connectors for continuous operation.
– Manual bleeder valve for purging air inside the filter, if necessary.
– Built-in manual bleeder valve for water in the filter body, for easy drainage of the filter without losing sand.
– Built-in collector at the bottom ensures balanced flow and filter backwash.
– Pressure gauge to control filter backwash.ADVANTAGES:
– Excellent performance and reliability: Millennium filters are designed to meet the needs of the most demanding customer and can filter from 5.500 l/h to 12,000 l/h at a filtering rate of 50 m3/h/m2. They are also fitted with an AstralPool multiport valve with 6+1 positions for filter, backwash, rinse, recirculate, waste, and close. In fact, this reliable valve is used on most AstralPool filters.MONOBLOC: For easier installation of the filtering system, Millennium filters are also available as monoblocs, i.e., the filters are assembled on a base with a latest generation Sena self-priming pump and all the necessary pipe fittings.
– Ergonomic base constructed of weatherresistant plastic.
– Optimization of size, performance, and aesthetics.
– Components designed for easy assembly and precise fitting.
– Millennium monoblocs include the Sena pump as standard equipment for optimal performance and cost-efficiency.
– Packaging contains pre-assembled unit for easier assembly and minimization of package volume.SKU: HS8259 - Sand Filters
CANTABRIC filter
Ivory colour. Injected thermo-plastic shell with built in base. Supplied with pressure gauge, manual air vent, and multiport valve. Maximum filtration velocity: 50 m3/h/m2.Maximum working pressure: 2,5 kg/cm2.
CHARACTERISTICS:
– Available with side mount or top mount, to adapt to the particular characteristics and available space at each pool site.
– Filter body manufactured of chemical-resistant, weatherresistant, inalterable plastic. Designed for outdoor use.
– Standard equipment with 11/2″, 6+1 multiport valve from AstralPool for the 400-mm, 500-mm, and 600-mm diameters or 2″, 6+1 multiport valve for 750-mm diameters, and 2 1/2″, 6+1 multiport valve for 900-mm diameters, with bayonet closure for filter, backwash, rinse, recirculate, waste, close, and winter operations (all inlets and outlets are connected).
– Transparent lid for easier visual inspection and access to the inside of the filter in side-mount valves.
– Collector and diffuser for continuous operation.
– Manual bleeder valve for purging air inside the filter, if necessary.
– Built-in manual bleeder valve for water of 3/4″ in the sand drain plug of the filter for easier drainage without losing sand.
– Sand drain: 1 1/2″ for 400-mm, 500-mm, and 600-mm diameters and 2″ for 750-mm diameter.
– Built-in collector at the bottom to ensure balanced flow and filter backwash.
– Pressure gauge to control filter backwash.
– Built-in base in the lower half of the filter, with holes for correct anchoring to the floor.
– Extra-large 225-mm manhole for easier handling and loading of sand in 900-mm diameters. The upper manhole is 177 mm in the rest of the range.ADVANTAGES:
– Easy to drain. No lost sand, thanks to a manual bleeder valve for water in the sand purge plug.
– Functionality. The advanced technology developed for the Cantabric filters offers extraordinary reliability in operation with low maintenance, allowing the filters to run safely with optimal pool filtering for many years. The equipment also includes the AstralPool 6+1 multiport valve with filter, backwash, rinse, recirculate, waste, and closed positions.
– Innovative design. Apart from functionality, AstralPool is concerned with creating a new image for its Cantabric filters, an approach that has led to a product with an attractive, unique design based on the use of a ivory tone and an innovative shape, while also focusing on adaptability to the needs of location.
– Extensive range. Cantabric filters provide an ideal solution for a wide variety of pool sizes, as they meet the filtering needs of pools between 30 and 240 m3 with flow rates of 6,000 l/h to 30,000 l/h at a filtering rate of 50 m3/h/m2.MONOBLOC:
Top mounted Cantabric monobloc Ø 400 with Sena pump
The Cantabric is now available in a monobloc version! This new equipment eases the installer’s work significantly by providing a compact, reliable solution with an attractive design.
– Includes a sturdy die-cast polypropylene base styled with the same aesthetics as the filter, while also keeping functionality in mind.
– Base is mounted next to the filter (filter continues to rest directly on the floor), thereby completely avoiding the possibility of breakage in the base caused by the filter weight.
– Perfect base-to-filter anchoring using stubs on base.
– The compact unit comes with a 1/3 HP Sena pump (technically speaking, other pumps can also be connected).SKU: HS7292
