Commercial roller BORNA type
This shaft is aimed to install on commercial indoor or outdoor swimming pools of 12.5 x 25 meters maximum. It can be used for bubble or reinforced polyethylene foam covers.The distance between the roller shaft and the pool edges must be reduced as much as possible to prevent abnormal wear and tear due to the friction on the coping.
| Code | Description | ||
| 38734 | Mechanical kit up to 12.5 m (up to 12.5 x 25 m) |
Reasons to buy from helloshoponline
- Guaranteed quality
- Careful handling
- On time delivery
- Support
- Telephone support
- Live chat support
- Trained staff
If you have questions or feedback about an order or plant care here’s how to contact:
- Email :info@helloshoponline.ae
- Phone:+971 50 5454 589
| Brands |
|---|
Related products
-
Automatic Covers and Reel Systems
Motor on the shaft
The motor is integrated into the interior of the roller axle and can be installed in already existing pools of up to 6 metres in width.
As in the Roussillon model the submerged zone containing the roller axle should be separated by a small concrete partition at the time of construction or later with a PVC partition. The slat colours available for both models are white, beige and opaque blue.SKU: HS7976 -
Automatic Covers and Reel Systems
Motor in dry mortar
The Roussillon automatic cover is the submerged model which incorporates the motor in a separate sunken compartment, and both the roller axle as well as the cover are housed at one end inside the pool itself.
The submerged zone containing the roller axle should be separated by a small concrete partition at the time of construction or with a PVC partition later on.
The basic elements for assembling the cover are the slats, the step slats, (from page 439), the mechanical kit, the embedding kit, the aluminium tie beam and the pit cover.
MECHANICAL KIT
Includes the following elements:
– Ø 146 mm extruded aluminium axle, 5 mm thick and Ø 30 mm joint shaft.
– Motor stand.
– Watertightness joints on bushing side.
– Watertightness joints on bearing stand side.
– 24 V reducer motor with stainless steel stand.
– 220/24V standard switchboard.
– On-off key switch.
Should be installed in full view of the pool. It works by continuous turning of the key.SKU: HS2567
