Inlets
Showing 25–48 of 52 results
-
Inlets
Multiflow return inlet to glue PN 6
MULTIFLOW SYSTEMThe eyeball has been marked with a series of “knock-outs” at 14, 20, and 25 mm, enabling the required flow to be selected at the time of installation.
Recommended max flow 4 m/sec., complies with EN 13451-1:
Ø 14= 2,2 m3/h, Ø20 = 4,5 m3/h, Ø25 = 7 m3/h. To glue onto Ø 63 mm, outside 6 bar pipe and inside Ø 50 mm. Made in white ABS. Can be installed with wall conduits: 15661-15660. Grille slots are < 8 mm. Complies with EN 13451-1.
Complies with standards:
EN 16582-1
EN 16713-2SKU: HS5336 -
Inlets
Multiflow return inlet with grille
MULTIFLOW SYSTEM
The eyeball has been marked with a series of “knock-outs” at 14, 20, and 25 mm, enabling the required flow to be selected at the time of installation.
Recommended max flow 4 m/sec., complies with UNE 13451-1:
Ø 14 mm = 30 m3/h, Ø 20 mm = 4,5 m3/h, Ø 25 mm = 7 m3/h To glue into Ø 50mm 10 bar pipe. Made in white ABS. With grilleSKU: HS7629 -
Inlets
Multiflow return inlets for panel pools
New inlets especially designed to be installed in panel pools between 10 and 15 cm thick.
The return model propels water from filtering and is installed with a Multiflow eyeball for flow adjustment. The connection is made by gluing a Ø 50 mm pipe.
The design facilitates prior assembly to the panel, in addition to the possibility of using the same wall conduit inlet. Easy to install, watertightness is ensured by placing a washer between the inlet and the liner.
SKU: HS6238 -
-
Inlets
Return inlet for liner pool
Made of AISI-316L stainless steel. Fits to 00344 and 00345 wall conduits and adapts to wall conduit 26171. Comes with gaskets and screws. Ø 20 mm eyeball. Eyeball fitted using screws. Recommended flow rate: 4.5 m3/h.
Complies with standards:
EN 16582-1
EN 16713-2SKU: HS3196 -
Inlets
Return nozzle for liner pools
Made entirely of 18/8/2 (AISI-316) stainless steel. The drain sucks water from the deepest part of the pool shell so that it can be completely recycled. It also plays an important role when the pool is being emptied. All models have a grill that complies with health and safety standards whereby the holes must be less than 8 mm apart to prevent bathers from trapping their fingers in them.
The range also includes an antivortex grill model for the prevention of whirlpools.SKU: HS1229 -
Inlets
Return nozzle large flow concrete pool
Return inlet for large flow rates that can also be used as a suction nozzle. Maximum suction flow rate of 30m3/h for a maximum flow rate speed of 4 m/s. Maximum suction flow rate of 5 m3/h for a maximum flow rate speed of 0.5 m/s. PVC body. Connection for Ø 75 or Ø 90mm pipe. Inlets can be installed into bushing 43590. Grille can be adjusted in any direction.
Complies with standards:
EN 16582-1
EN 16713-2SKU: HS1265 -
Inlets
Return nozzle large flow panel pool
Inlet nozzles for large flows.
They can be used as suction nozzle also.
· PVC body, ABS grille, PA flange and AISI 304 screws. Inlet flow rate 30m3/h
· Holes in grilles are not bigger than 8 mm
· Inlet flow rate 30m3/h for a maximum water flow velocity of 4m/s
· Suction flow rate 5m3/h for a maximum water flow velocity of 0.5m/s
· 30º jet inclined at 360 º steerable.
· Ø75 or Ø90 pipe connection
· The nozzle can be installed in the wall conduit 43590.
Complies with Standards:
EN 16582-1
EN 16713-2SKU: HS7749 -
Inlets
Return nozzle large flow prefabricated pool
Inlet nozzles for large flows.
They can be used as suction nozzle also.
· PVC body, ABS grille, PA flange and AISI 304 screws. Inlet flow rate 30m3/h
· Holes in grilles are not bigger than 8 mm according to EN 13451-1 standard.
· Inlet flow rate 30m3/h for a maximum water flow velocity of 4m/s according to EN 13451-1 standard.
· Suction flow rate 5m3/h for a maximum water flow velocity of 0.5m/s according to EN 13451-1 standard.
· 30º jet inclined at 360 º steerable.
· Ø75 or Ø90 pipe connection
· The nozzle can be installed in the wall conduit 43590.
· Model 41521 with double gasket
SKU: HS5738 -
-
Inlets
STAINLESS STEEL EMBELLISHER for ABS suction inlet
Front plate made of AISI-316L stainless steel for ABS suction inlets. Compatible with inlets codes 56499, 00330 and 00332.
The combination of this front plate with the ABS codes results in a suction nozzle.
For liner pools.
Includes flange, gaskets and screws.
SKU: HS9363 -
-
Inlets
Suction nozzle for overflow with liner
Suction nozzle for overflow with liner.
· PVC body, PA flange and Stainless Steel screw.
· Suction flow rate 7m3/h for a maximum water flow velocity of 0.5m/s
·Internal connection with Ø 75 mm tube or outside with Ø 90 mm tube. + connection link
· Double gasket
Complies with Standards:
EN 16582-1
EN 16713-2SKU: HS9527 -
Inlets
Suction nozzle for panel pools
New inlets especially designed to be installed in panel pools between 10 and 15 cm thick.
The suction model can be used to connect bottom cleaners with a 1½ inches BSP thread. The connection is made by gluing a Ø 50 mm pipe.
The design facilitates prior assembly to the panel, in addition to the possibility of using the same wall conduit inlet. Easy to install, watertightness is ensured by placing a washer between the inlet and the liner.Complies with Standards:
EN 16582-1
EN 16713-2SKU: HS4748