Temperature Control

The AP Heat II Air/Water heat pump has been designed to heat both pools and hot tubs. Thus, by taking advantage of the free calories in the air, pools can be heated to lengthen the swimming season cheaply. The AP Heat II by AstralPool is without a doubt the best performing heat pump on the market.
Performance:
• Robust and light ABS casing resistant to sunlight.
• R-407C refrigerant gas (environmentally friendly).
• Heats pools and/or hot tubs.
• Easy-to-use multi-lingual control panel with display of actual temperature and default setting; alarm messages (delays, timer settings, defrosting, etc.).
• Works at outdoor temperatures starting at 5ºC.
• Two defrosting cycles in all models: forced draught or induced.
• Pressure switch to control water flow, external gauge to control condensation and optimum flow regulation.
•​ Modbus communication.
EOM energy-saving mode: shows the pump’s energy performance while it is working. The electronic card reads parameters and sensors to calculate the right settings and adjust them for optimum performance in each installation.
Wireless remote control: for total control of the heater so that it can be switched on and off, the heat or cooling mode selected (optional), the ECO and EOM modes activated, the pool or hot tub heated (optional), the default value modified, the pool and outdoor temperature read, alarm messages received and the flow signal displayed.
Alarm history report and diagnosis of failures: so that technical assistance is more effective and information about the heater available in any place.

ELYO SMART heat pumps heat or cool (up to a maximum of 20 ° C) private outdoor swimming pools up to 130 m3. These environmentally friendly air-to-water heat pumps transmit energy from the outside air to the pool water.
Economical, they restore between 4 and 5 times the energy they consume. Operate down to an outside temperature of -5 ° C.
With its thermoplastic resin body on a metal frame and its protected control box, they are perfectly resistant to bad weather and UV rays. Very quiet and easy to use.
• Large evaporator with hydrophilic finish for better performance capacity.
• Axial fan.
• Defrost by cycle inversion (4-way valve).
• TOSHIBA or PANASONIC compressor depending on the model (see table of characteristics).
• Titanium heat exchanger with high pressure tube (20 bars), “twisted” larger contact surface and better efficiency in a PVC heating body.
• Full charge of R410A gas, ecological.
• Filtration control, heating priority for better comfort.
• High reliability integrated flow sensor (paddle sensor).
• Waterproof electrical box for better component protection.
• Ease of installation thanks to exterior access to electrical connections.
• Easy-to-use digital display with a programming clock.
• Remote wired display at 10m (wire supplied).
• Winter drain accessible from the outside. Surface mounting box supplied.
• Included TiltWatch, overturn indicator. The indicator on the packaging turns red, if the carton has been coated.
• Supplied with Silent-Bloc condensate drain pipe and a protective cover.
• Power available from 9 kw Mono to 28 kW Tri.

Either heats or chills the water depending on the needs.
·Compact design model in aluminium for outdoor installation, resistant to corrosive environments.
·Evaporating battery (air-water exchanger) built with copper tubing which includes tempered aluminium fins specially designed for corrosive surroundings.
·Axial fan.
·Reciprocating compressor or scroll.
·Titanium condensers.
·Filled with gas Freon R407C with low ecological impact.
·A cooling circuit made of heavy wall copper tubing, processed to repel rust.
·Low and High Pressure (LP/HP) mini-pressure switches with manual reset.
·Expansion valve with pressure equaliser.
·Dehydrating fi lter.
·Hydraulic circuit with flow switch at the water inlet, solvent socket connections in PVC. Standard connections are in metric system. Other standards could also be available by request.
·Electrical control panel for complete process control and digital high-sensitivity regulation to guarantee optimum performance with minimum power consumption at all times.
·II/230V/50Hz – III/400V/50Hz depending on the model. Available in other electrical configurations, voltages and frequencies by request.

• Full inverter technology: silent and energy saving.
• 8 power levels from 8.5 kW to 35 kW*.
• – 20°C lowest outdoor air working temperature.

*Temperature conditions of 28°C Air / 28°C Water

Technical features:
• New, wide LED touchscreen.
• Optional remote control kit.
• Heating priority mode (filtration pump control).
• ABS plastic housing with new injected fan grid; galvanized steel protection grid around the evaporator.
• DC, variable speed fan.
• Automatic cooling mode.
• Automatic defrosting.
• HP & LP safety pressure switch.
• Water flow switch.
• Titanium water exchanger condenser.
• Inverter Rotary compressor.
• Electronic expansion valve.

Accessories included:
• 1 x Winter Cover.
• 4 x Anti-vibration feet.
• Condensate drainage kit.
• 1 x remote display kit (including 10m extension cable).
• 1 x 10m Modbus Signal wire (to connect the heat pump to the Connect Box).
• 2 x PVC fittings 1/2 union Ø 50.

Optional accessories:
• Remote display kit. Code: 74199.

Air/water heat pump for heating pools with inverter technology. Private pools up to 80 m3. Inverter technology enables a heat pump to work on the power it needs depending on demand. This increases a facility’s efficiency, makes it less noisy and it consumes less.
· The Pro-Elyo Inverter has been specially designed to work in temperatures as low as -10 ºC.
· The inverter technology makes it possible to heat a pool with less noise and at a lower cost.
· Its COP is up to 30% greater than a conventional heat pump.
· It has 3 operating modes: powerful, smart and quiet.
· Reverse cycle defrosting
· Electronic expansion valve.
· R-407A refrigerant
· Heat and cold regulated to keep a constant temperature
· ABS housing
· High and low pressure flow meter
· Winter cover included.