Pumps
Showing 1–24 of 48 results
-
-
-
Strainers
60 litres with sight glass lid – Strainer in polyester and fibreglass
Manufactured in polyester resin and fibre glass. Total capacity of 60 liters. Sight-glass lid to check stariner. Drilled flanges according to DIN-2501 regulation. Band type closure. Drain plug. 1.5 bar maximum operating pressure. Hole mesh diameter: Ø 4,9 mm
SKU: HS7547 -
Self-priming pumps
ADAPT PRO SP
The body of the pump is made of the latest generation thermoplastics. The pumps are self-priming and range from 3/4 Hp up to 2 Hp, and are provided with both single-phase and three-phase motors. A pre-filter has been integrated into the body of the pump to prevent the entry of any foreign bodies which could cause damage to the hydraulic parts of the pump.
The motors supplied with the motor pump unit have been protected with IP-55 protection and are adapted to withstand hot atmospheres and high humidity levelsSKU: HS6222 -
Self-priming pumps
ADAPT PRO ST
The body of the pump is made of the latest generation thermoplastics. The pumps are self-priming and range from 1/2 Hp up to 1.5 Hp, and are provided with both single-phase and three-phase motors. A pre-filter has been integrated into the body of the pump to prevent the entry of any foreign bodies which could cause damage to the hydraulic parts of the pump.
The motors supplied with the motor pump unit have been protected with IP-55 protection and are adapted to withstand hot atmospheres and high humidity levelsSKU: HS9753 -
Self-priming pumps
ADAPT PRO ST
The body of the pump is made of the latest generation thermoplastics. The pumps are self-priming and range from 1/2 Hp up to 1.5 Hp, and are provided with both single-phase and three-phase motors. A pre-filter has been integrated into the body of the pump to prevent the entry of any foreign bodies which could cause damage to the hydraulic parts of the pump.
The motors supplied with the motor pump unit have been protected with IP-55 protection and are adapted to withstand hot atmospheres and high humidity levelsSKU: HS1721 -
Self-priming pumps
ADAPT PRO UT
The body of the pump is made of the latest generation thermoplastics. The pumps are self-priming and range from 3/4 Hp up to 3 Hp, and are provided with both single-phase and three-phase motors. A pre-filter has been integrated into the body of the pump to prevent the entry of any foreign bodies which could cause damage to the hydraulic parts of the pump.
The motors supplied with the motor pump unit have been protected with IP-55 protection and are adapted to withstand hot atmospheres and high humidity levelsSKU: HS6292 -
Centrifugal pumps
ARAL C 1500 Pump
Monobloc horizontal centrifugal pumps with a horizontal volute and a attached pre-filter with an stainless steel AISI-304 basket. Appropiate for public swimming pools and clean liquid recirculation. 1450 r.p.m. high performance pumps with the body, impeller, pre-filter and bracket manufactured in cast iron. The shaft is made of stainless steel AISI-316 with bronze protection, and the mechanic seal is made of stainless steel AISI-316. The motor holds an IP-54 protection. The gamma ranges from triphasic 3 HP to 25 HP motors. Such motors have a 230/400/690V 50Hz working voltage (60 hz could also be supplied). Hub by flange according to DIN-2501 regulation.
According the Energy Efficiency regulation class IE2
SKU: HS7883 -
Centrifugal pumps
ARAL C 3000 Pump
Monobloc horizontal centrifugal pumps with a horizontal volute and a attached pre-filter with an stainless steel AISI-304 basket. Appropiate for public swimming pools and clean liquid recirculation. 3000 r.p.m. high performance pumps with the body, impeller, pre-filter and bracket manufactured in cast iron. The shaft is made of stainless steel AISI-316 with bronze protection, and the mechanic seal is made of stainless steel AISI-316. The motor holds an IP-54 protection. The gamma ranges from triphasic 3 HP to 25 HP motors. Such motors have a 230/400/690V 50Hz working voltage (60 hz could also be supplied). Hub by flange according to DIN-2501 regulation. According the Energy Efficiency regulation class IE2.
SKU: HS2227 -
Self-priming pumps
BAIKAL SP 3000 Pump
Monobloc self-priming high performance pumps, designed for sea water. The hydraulic body, impeller and diffuser manufactured in bronze. The shaft is made of stainless steel AISI-316, and the mechanic seal is made of stainless steel AISI-316 and tungsten. Includes a prefilter with a polypropilene basket. The motor holds an IP-54 protection. The gamma ranges from triphasic 2 HP to 5.5 HP motors. Such motors have a 230/400/690V 50Hz working voltage (60 hz could also be supplied). For the 2 CV motor, 24/42V is also avaiable. According the Energy Efficiency regulation class IE2.SKU: HS1572 -
Self-priming pumps
Boise Pump
The Boise pump is designed to work under a vast range of conditions. Whatever the pool type, it always delivers the required flow rate and pressure.
The Boise pump is built for ease of handling. It has a see-through lid for easy inspection and a large strainer to extend time between cleanings.
The motor materials are rustproof; the motor shaft is made from stainless steel and the sealed bearings never need lubrication. The thermoplastic housing withstands extreme heat and corrosion.
Flow rates in l/h at 6 mwc for 0.33 HP, 8 mwc for 0.5 HP, 10mwc for 0.75 HP and 12 mwc for rest of range.SKU: HS9551 -
Centrifugal pumps
COLORADO Pump
· Centrifugal High Flow Plastic pumps at 3000 rpm. · Electropumps for swimming pools, with or without prefilter, ideal for high flow at low pressure. · Prefilter with transparent lid. Fixing by butterfly nut. Easy accessibility. · Pump body and prefilter made in polypropylene reinforced with fibre glass. · Bronze impeller. · Pump shaft and prefilter basket in stainless steel. · Motors with IP-55 protection, 3000 r.p.m., 230/400 V or 400/690 V, and 50Hz. · From 7.5 HP to 12.5 HP.SKU: HS5836 -
Self-priming pumps
Colusa Pump
The Colusa pump delivers highly efficient hydraulic performance. It has been designed to be silent, long-lasting and reliable.
The pumps are self-priming from 1/2 hp to 3 hp and are supplied with 3,000 rpm single-phase and three-phase motors. Silent, the new hydraulic design has an extremely low noise level. A prefilter is mounted on the body of the pump to prevent foreign bodies from entering it that may damage its hydraulic parts. This prefilter has a wing nut and a transparent cover that makes maintenance work easier.
Flow rates in l/h at 8 mwc for 1/ 2 hp, 10 mwc for 1 and 1.5 hp, 12 mwc for 2 hp and 14 mwc for 3 hp.SKU: HS9237 -
Control boxes
Control box for pump control
IP-65 protection. Transparent glass with lock and keys. All products are compatible with:
– 220/240V 1-phase (P+N+T) 50Hz/60Hz
– 380/415V 3-phase (3P+N+T) 50Hz/60Hz
– 220/230V 3-phase (3P+T) 50Hz/60Hz
24H master clock with ¼h steps. Conection for pump remote control (run/stop,…), for the auxiliar equipment (cold detector,…). All the products are supplied with:
– Electric scheme.
– Connection diagram.
– Installation instructions.
– CE certification.
– Gland for each cable input and output.
– Screws and stoppers (4) for wall installation.
The control box must be chosen according to the filtration pump nominal current:
Magnetothermic protection ( from 1,6 to 10A ) contactor, 24h program clock . 3 positions: Auto / 0 / Manual.SKU: HS6229 -
Control boxes
Control box for pump control and 1 underwater light
IP-65 protection. Transparent glass with lock and keys. All products are compatible with:
– 220/240V 1-phase (P+N+T) 50Hz/60Hz
– 380/415V 3-phase (3P+N+T) 50Hz/60Hz
– 220/230V 3-phase (3P+T) 50Hz/60Hz24H master clock with ¼h steps. Conection for pump remote control (run/stop,…), for the auxiliar equipment (cold detector,…). All the products are supplied with:
– Electric scheme.
– Connection diagram.
– Installation instructions.
– CE certification.
– Gland for each cable input and output.
– Screws and stoppers (4) for wall installation.The control box must be chosen according to the filtration pump nominal current:
Magnetothermic protection (2 pumps: 1ª from 6 to 10A and 2ª from 2 to 10A) contactor, 24h program clock . 3 positions: Auto / 0 / Manual. 230V 10A protected output for lights. 12V 315VA protected output for 1 underwater light.SKU: HS7131 -
Control boxes
Control box for pump control and 2 underwater lights
IP-65 protection. Transparent glass with lock and keys. All products are compatible with:
– 220/240V 1-phase (P+N+T) 50Hz/60Hz
– 380/415V 3-phase (3P+N+T) 50Hz/60Hz
– 220/230V 3-phase (3P+T) 50Hz/60Hz
24H master clock with ¼h steps. Conection for pump remote control (run/stop,…), for the auxiliar equipment (cold detector,…). All the products are supplied with:
– Electric scheme.
– Connection diagram.
– Installation instructions.
– CE certification.
– Gland for each cable input and output.
– Screws and stoppers (4) for wall installation.
The control box must be chosen according to the filtration pump nominal current:
Magnetothermic protection (2 pumps: 1ª from 6 to 10A and 2ª from 2 to 10A) contactor, 24h program clock . 3 positions: Auto / 0 / Manual. 230V 10A protected output for lights. 12V 315VA protected output for 1 underwater light.
SKU: HS6182 -
Control boxes
Control box for pump control and underwater light
IP-65 protection. Transparent glass with lock and keys. All products are compatible with:
– 220/240V 1-phase (P+N+T) 50Hz/60Hz
– 380/415V 3-phase (3P+N+T) 50Hz/60Hz
– 220/230V 3-phase (3P+T) 50Hz/60Hz24H master clock with ¼h steps. Conection for pump remote control (run/stop,…), for the auxiliar equipment (cold detector,…). All the products are supplied with:
– Electric scheme.
– Connection diagram.
– Installation instructions.
– CE certification.
– Gland for each cable input and output.
– Screws and stoppers (4) for wall installation.The control box must be chosen according to the filtration pump nominal current:
Magnetothermic protection ( from 1,6 to 10A ) contactor, 24h program clock . 3 positions: Auto / 0 / Manual. 230V 10A protected output for lights.SKU: HS7978 -
Control boxes
Control box for pump control and underwater light
Control box for pump control and underwater light with diferential protection – single-phase.
IP-65 protection. Transparent glass with lock and keys. All products are compatible with:
– 220/240V 1-phase (P+N+T) 50Hz/60Hz
– 380/415V 3-phase (3P+N+T) 50Hz/60Hz
– 220/230V 3-phase (3P+T) 50Hz/60Hz24H master clock with ¼h steps. Conection for pump remote control (run/stop,…), for the auxiliar equipment (cold detector,…). All the products are supplied with:
– Electric scheme.
– Connection diagram.
– Installation instructions.
– CE certification.
– Gland for each cable input and output.
– Screws and stoppers (4) for wall installation.The control box must be chosen according to the filtration pump nominal current:
Magnetothermic protection (2 pumps: 1ª from 6 to 10A and 2ª from 2 to 10A) contactor, 24h program clock . 3 positions: Auto / 0 / Manual. 230V 10A protected output for lights. 12V 315VA protected output for 1 underwater light.
SKU: HS1446 -
Control boxes
Control box for pump control and underwater light with diferential protection – three-phase
Control boxesControl box for pump control and underwater light with diferential protection – three-phase
IP-65 protection. Transparent glass with lock and keys. All products are compatible with:
– 220/240V 1-phase (P+N+T) 50Hz/60Hz
– 380/415V 3-phase (3P+N+T) 50Hz/60Hz
– 220/230V 3-phase (3P+T) 50Hz/60Hz24H master clock with ¼h steps. Conection for pump remote control (run/stop,…), for the auxiliar equipment (cold detector,…). All the products are supplied with:
– Electric scheme.
– Connection diagram.
– Installation instructions.
– CE certification.
– Gland for each cable input and output.
– Screws and stoppers (4) for wall installation.The control box must be chosen according to the filtration pump nominal current:
Magnetothermic protection (2 pumps: 1ª from 6 to 10A and 2ª from 2 to 10A) contactor, 24h program clock . 3 positions: Auto / 0 / Manual. 230V 10A protected output for lights. 12V 315VA protected output for 1 underwater light.SKU: HS6472