Pool Circulation
Showing 73–96 of 195 results
-
Inlets
Multiflow return inlet threated for liner
MULTIFLOW SYSTEM
The eyeball has been marked with a series of “knock-outs” at 14, 20, and 25, enabling the required flow to be selected at the time of installation.
Recommended max flow 4 m/sec., complies with UNE 13451-1:
Ø 14 mm = 30 m3/h, Ø 20 mm = 4,5 m3/h, Ø 25 mm = 7 m3/h For liner pools, white ABS plastic with gaskets and screws. External thread of 2″, Ø 50 mm solvent internal. Installation with wall conduits 15662 or 15663 is recommended.Item available in White, Beige, Light Gray and Anthracite colors.
Complies with standars:
EN 16582-1
EN 16713-2SKU: HS1223 -
Inlets
Multiflow return inlet to glue PN 6
MULTIFLOW SYSTEMThe eyeball has been marked with a series of “knock-outs” at 14, 20, and 25 mm, enabling the required flow to be selected at the time of installation.
Recommended max flow 4 m/sec., complies with EN 13451-1:
Ø 14= 2,2 m3/h, Ø20 = 4,5 m3/h, Ø25 = 7 m3/h. To glue onto Ø 63 mm, outside 6 bar pipe and inside Ø 50 mm. Made in white ABS. Can be installed with wall conduits: 15661-15660. Grille slots are < 8 mm. Complies with EN 13451-1.
Complies with standards:
EN 16582-1
EN 16713-2SKU: HS5336 -
Inlets
Multiflow return inlet with grille
MULTIFLOW SYSTEM
The eyeball has been marked with a series of “knock-outs” at 14, 20, and 25 mm, enabling the required flow to be selected at the time of installation.
Recommended max flow 4 m/sec., complies with UNE 13451-1:
Ø 14 mm = 30 m3/h, Ø 20 mm = 4,5 m3/h, Ø 25 mm = 7 m3/h To glue into Ø 50mm 10 bar pipe. Made in white ABS. With grilleSKU: HS7629 -
Inlets
Multiflow return inlets for panel pools
New inlets especially designed to be installed in panel pools between 10 and 15 cm thick.
The return model propels water from filtering and is installed with a Multiflow eyeball for flow adjustment. The connection is made by gluing a Ø 50 mm pipe.
The design facilitates prior assembly to the panel, in addition to the possibility of using the same wall conduit inlet. Easy to install, watertightness is ensured by placing a washer between the inlet and the liner.
SKU: HS6238 -
Pool Circulation, Pool Products
NORM main drain Antivortex grille
New range of Main drains according the normatives EN-13451-1 and EN-13451-3, available for public and private pools, supplied with flat grilles or antivortex grille. Made in white ABS and UV treatment, 2″ side connections and bottom connection with plug for fitting the hydrostatic relief valve (00277) and drainage pipe (21581). Recommended max. flow rate: 15 m3/h.
SKU: HS5844 -
Pool Circulation, Pool Products
NORM main drain Antivortex grille
Range of Main drains according the Standards EN-16582-1, EN 16713-2, available for public and private pools, supplied with flat grilles or antivortex grille. Made in white ABS and UV treatment, 2″ side connections and bottom connection with plug for fitting the hydrostatic relief valve (00277) and drainage pipe (21581). Recommended max. flow rate: 15 m3/h
Item available in White, Beige, Light Gray and Anthracite colors.
SKU: HS4611 -
Pool Circulation, Pool Products
NORM main drain Flat grille
Range of main drains according to the Standards EN-16582-1, EN 16713-2, available for public and private pools, supplied with flat grilles or antivortex grille. Made in white ABS and UV treatment, 2″ side connections and bottom connection with plug for fitting the hydrostatic relief valve (00277) and drainage pipe (21581). Recommended max. flow rate: 15 m3/hItem available in White, Beige, Light Gray and Anthracite colors.
SKU: HS5115 -
Pool Circulation, Pool Products
NORM main drain in polyester and fibreglass – 330 mm x 330 mm. Inox Grille A-316L
Pool Circulation, Pool ProductsNORM main drain in polyester and fibreglass – 330 mm x 330 mm. Inox Grille A-316L
Range of main drains manufactured in polyester resin and fibreglass. Grille in stainless steel A-316L or plastic. Optional hydrostatic valve.
Complies with Standards:
EN 13451-1/3 2012SKU: HS8797 -
-
-
-
-
-
-
Wall conduits
Rear 2” male thread and inside Ø 50 mm solvent socket
New range of 300 mm conduits for Ø 2″ inlets and “Multiflow”, that can be easily cut to other lengths depending on pool shell thickness. Made in ABS. They all have 2 holes for positioning within the pool shell.
The front face of the conduit is recessed which means the inlet body is installed flush with the wall leaving the liner flat and only the inlet face plate visible.
SKU: HS7694