Pool Circulation
Showing 97–120 of 195 results
-
Wall conduits
Rear outside Ø 63 mm and inside Ø 50 mm to glue
New range of 300 mm conduits for Ø 2″ inlets and “Multiflow”, that can be easily cut to other lengths depending on pool shell thickness. Made in ABS. They all have 2 holes for positioning within the pool shell.
The front face of the conduit is recessed which means the inlet body is installed flush with the wall leaving the liner flat and only the inlet face plate visible.
SKU: HS1554 -
-
Inlets
Return inlet for liner pool
Made of AISI-316L stainless steel. Fits to 00344 and 00345 wall conduits and adapts to wall conduit 26171. Comes with gaskets and screws. Ø 20 mm eyeball. Eyeball fitted using screws. Recommended flow rate: 4.5 m3/h.
Complies with standards:
EN 16582-1
EN 16713-2SKU: HS3196 -
Inlets
Return nozzle for liner pools
Made entirely of 18/8/2 (AISI-316) stainless steel. The drain sucks water from the deepest part of the pool shell so that it can be completely recycled. It also plays an important role when the pool is being emptied. All models have a grill that complies with health and safety standards whereby the holes must be less than 8 mm apart to prevent bathers from trapping their fingers in them.
The range also includes an antivortex grill model for the prevention of whirlpools.SKU: HS1229 -
Inlets
Return nozzle large flow concrete pool
Return inlet for large flow rates that can also be used as a suction nozzle. Maximum suction flow rate of 30m3/h for a maximum flow rate speed of 4 m/s. Maximum suction flow rate of 5 m3/h for a maximum flow rate speed of 0.5 m/s. PVC body. Connection for Ø 75 or Ø 90mm pipe. Inlets can be installed into bushing 43590. Grille can be adjusted in any direction.
Complies with standards:
EN 16582-1
EN 16713-2SKU: HS1265 -
Inlets
Return nozzle large flow panel pool
Inlet nozzles for large flows.
They can be used as suction nozzle also.
· PVC body, ABS grille, PA flange and AISI 304 screws. Inlet flow rate 30m3/h
· Holes in grilles are not bigger than 8 mm
· Inlet flow rate 30m3/h for a maximum water flow velocity of 4m/s
· Suction flow rate 5m3/h for a maximum water flow velocity of 0.5m/s
· 30º jet inclined at 360 º steerable.
· Ø75 or Ø90 pipe connection
· The nozzle can be installed in the wall conduit 43590.
Complies with Standards:
EN 16582-1
EN 16713-2SKU: HS7749 -
Inlets
Return nozzle large flow prefabricated pool
Inlet nozzles for large flows.
They can be used as suction nozzle also.
· PVC body, ABS grille, PA flange and AISI 304 screws. Inlet flow rate 30m3/h
· Holes in grilles are not bigger than 8 mm according to EN 13451-1 standard.
· Inlet flow rate 30m3/h for a maximum water flow velocity of 4m/s according to EN 13451-1 standard.
· Suction flow rate 5m3/h for a maximum water flow velocity of 0.5m/s according to EN 13451-1 standard.
· 30º jet inclined at 360 º steerable.
· Ø75 or Ø90 pipe connection
· The nozzle can be installed in the wall conduit 43590.
· Model 41521 with double gasket
SKU: HS5738 -
Pool Circulation, Pool Products
Skimmer 15 L with standard mouth
Supplied with adhesive gaskets, flanges, and screw kit. All skimmer parts exposed are UV resistant. Recommended flow 5000 l/h. In white ABS with silent weir flap and flow regulation plug. 1 1/2″ female – 2″ male suction connections. Ø 50 mm. solvent connection also provided. Overflow connection Ø 40 mm.
UNE-EN-16582-1, UNE-EN-16713-2
SKU: HS7821 -
Pool Circulation, Pool Products
Skimmer 15 L with wide mouth
Supplied with adhesive gaskets, flanges, and screw kit. All skimmer parts exposed are UV resistant. Recommended flow 5000 l/h. In white ABS with silent weir flap and flow regulation plug. 1 1/2″ female – 2″ male suction connections. Ø 50 mm. solvent connection also provided.
Overflow connection Ø 40 mm.Is compatible with EASYCOLOR Inlet sheath item 73166CLXXX to an easy color change of the skimmer embellisher and the floater. This sheath could be installed without change the skimmer mouth what is very practical to renew or upgrade pools.
EN-16582-1, EN-16713-2
Item available in White, Beige, Light Gray and Anthracite colors.
SKU: HS9947 -
Pool Circulation, Pool Products
Skimmer 17.5 L Panel Protect
Range of skimmers for Moonpool panels (polymer) and Skypool panels (steel), which, thanks to their design and specialassembly protect the panel from direct contact with the water. Their design allows perfect align-ment with the liner in panels between 2 and 18 mm thick. If used with oanels of other thickness they will nit fit perfectly.
SKU: HS9333 -
Pool Circulation, Pool Products
Skimmer 17.5 L Panel Protect inside assembly
Skimmers for panelled pools. The wide throat should be fixed into the inside of the panel. Each skimmer box includes the necessary adhesive.
Versions of the 17.5 litre skimmer can be supplied with extensions much larger than those previously stated. This could be of particular interest when using wider coping stones than the usual width.
Is compatible with EASYCOLOR Inlet sheath item 73166CLXXX to an easy color change of the skimmer embellisher and the floater. This sheath could be installed without change the skimmer mouth what is very practical to renew or upgrade pools.
Complies with Standards EN-16582-1, EN 16713-2
SKU: HS3572 -
Pool Circulation, Pool Products
Skimmer 17.5 L with standard mouth
Supplied with adhesive gaskets, flanges, and screw kit. All skimmer parts exposed are UV resistant. Recommended flow 7500 l/h. In white ABS with silent weir flap and flow regulation plug. 1 1/2″ female – 2″ male suction connections. Ø 50 mm. solvent connection also provided.
Overflow connection Ø 40 mm. Basket secured to base with bayonet fixing.Complies with Standards EN-16582-1, EN-16713-2
Item available in White, Beige, Light Gray and Anthracite colors.
SKU: HS1243 -
Pool Circulation, Pool Products
Skimmer 17.5 L with standard mouth and extended throat
Supplied with adhesive gaskets, flanges, and screw kit. All skimmer parts exposed are UV resistant. Recommended flow 7500 l/h. In white ABS with silent weir flap and flow regulation plug. 1 1/2″ female – 2″ male suction connections. Ø 50 mm. solvent connection also provided.
Overflow connection Ø 40 mm. Basket secured to base with bayonet fixing.Complies with Standards EN-16582-1, EN 16713-2
Item available in White, Beige, Light Gray and Anthracite colors.
SKU: HS9653 -
Pool Circulation, Pool Products
Skimmer 17.5 L with wide mouth
Supplied with adhesive gaskets, flanges, and screw kit. All skimmer parts exposed are UV resistant. Recommended flow 7500 l/h. In white ABS with silent weir flap and flow regulation plug. 1 1/2″ female – 2″ male suction connections. Ø 50 mm. solvent connection also provided.
Overflow connection Ø 40 mm. Basket secured to base with bayonet fixing.Complies with Standards EN-16582-1, EN 16713-2
Item available in White, Beige, Light Gray and Anthracite colors.
SKU: HS6835 -
Pool Circulation, Pool Products
Skimmer 17.5 L with wide mouth and extended throat
Supplied with adhesive gaskets, flanges, and screw kit. All skimmer parts exposed are UV resistant. Recommended flow 7500 l/h. In white ABS with silent weir flap and flow regulation plug. 1 1/2″ female – 2″ male suction connections. Ø 50 mm. solvent connection also provided.
Overflow connection Ø 40 mm. Basket secured to base with bayonet fixing.Complies with Standards EN-16582-1, EN-16713-2
SKU: HS5657 -
Pool Circulation, Pool Products
Skimmer A-100
In AISI-316L stainless steel. With Ø 50mm overflow. Stainless steel basket and lid included. Basket capacity
1,2 L. Comes with housing for assembling the 00256 level regulator valve With connection for an equipotential outlet.
Recommended flow rate: 7.5 m3/h.
Does not include trim code 00255.
For liner, prefabricated and panel pools use coupling kit 07525 not included.EN 16582-1 and EN 16713-2
SKU: HS4746 -
Pool Circulation, Pool Products
Skimmer body A-201
In AISI-316L stainless steel. With Ø 50mm overflow. Skimmer housing without telescopic lid. Comes with housing for assembling the 00256 level regulator valve.
Ø 63 mm suction connection.
With connection for an equipotential outlet.
Basket can be removed from front. Does not include trim code 07251.
For liner, prefabricated and panel pools use coupling kit 07525 not included.EN 16582-1 y EN 16713-2
SKU: HS4191 -
Pool Circulation, Pool Products
Skimmer body A-202
In AISI-316L stainless steel. With Ø 50 mm overflow. Skimmer housing without telescopic lid.
With earth connection.
Basket can be removed from front.
Does not include trim code 07251.
For liner, prefabricated and panel pools use coupling kit 07525 not included.EN 16582-1 y EN 16713-2
SKU: HS2758