Aqua Stop PM 660 Piscimar

Pool Store

Aqua-Stop

This is a specially formulated product that works as a sealant to fill small leaks inside pools and circulation pipes or fittings (inlets, drains, etc.). The concentrated viscous liquid can be added directly into the skimmer or at the mouth of an inlet. Once it mixes in the water and comes in contact with the air found at the leak, it solidifies.

Instructions:

  • EXTREMELY IMPORTANT: Turn off the pool pump and turn the handle on the MPV to by-pass/recirculate position. You cannot let the liquid pass through the filter media.
  • Add 1 L/75m3 into the skimmer/inlet
  • Wait for 40 minutes then run the pump on the by-pass position for 8 hours
  • Turn it off, take note of the water level and check again after 24 hours
  • If there is an improvement, return the filter to normal and switch on the pump

*Large pools may be required to repeat this process

Product Detail:

  • 1.5 Kg Can
  • PM 660
  • HS Code: 29239000
  • Brand: Piscimar
  • Origin: Spain

NOTE:

  • Only applicable for pools with solid backing (concrete/fiberglass/liner) will not work for above-ground (Intex/Bestway)
  • Do NOT allow the product to pass through the filter as this will clog the sand/glass media damaging the filter.
  • If the water level is reducing less than 1 tile line every 2 days, the leak can be considered small and Aqua-Stop may be used to treat it.
  • This is a supportive product only. If the leak issue is not resolved after the first or second attempt, the size of the leak is much larger and requires professional treatment.
  • Applicable to pores up to 3mm in diameter, if the leak is larger or if there are several, the effectiveness of this product will greatly reduce.
  • Swimming is allowed only after 24 hours of adding this product

Reasons to buy from helloshoponline

  • Guaranteed quality
  • Careful handling
  • On time delivery
  • Support
    • Telephone support
    • Live chat support
  • Trained staff

If you have questions or feedback about an order or plant care here’s how to contact:

  1. Email :info@helloshoponline.ae
  2. Phone:+971 50 5454 589

د.إ122.85

Compare

Introduction

Owning a pool is a wonderful luxury, but it also comes with its fair share of maintenance challenges. Keeping your pool clean and well-maintained can be quite a task, especially when dealing with water leakage issues. This is where “Aqua Stop,” a revolutionary product in the world of pool maintenance, comes into play. In this article, we’ll explore how Aqua Stop PM 660 Piscimar can be the game-changer for pool owners, offering them a convenient and effective solution to tackle water leakage problems.

Understanding the Importance of Pool Maintenance

Maintaining a pool goes beyond simply skimming leaves and debris off the water’s surface. Proper pool maintenance ensures the longevity of your pool and the safety of its users. From chemical balance to water circulation, every aspect needs attention. However, water leakage can disrupt the balance and make maintenance more challenging.

The Challenge of Water Leakage

Water leakage is a common issue that many pool owners face. It not only leads to water wastage but also affects the pool’s water balance and can damage the surrounding area. Traditional methods of fixing leaks can be time-consuming, costly, and may not always provide a permanent solution.

Introducing Aqua Stop: Your Leak-Proof Solution

What is Aqua Stop?

Aqua Stop is a cutting-edge product specifically designed to address water leakage problems in pools. It’s a sealant that effectively seals leaks, cracks, and gaps in your pool, ensuring that water stays where it belongs – inside the pool.

How Does Aqua Stop Work?

Utilizing advanced polymer technology, Aqua Stop forms a watertight seal on various pool surfaces, such as concrete, fiberglass, and vinyl. This prevents water from seeping through, eliminating leaks and reducing the need for frequent refilling.

Benefits of Using Aqua Stop

  • Cost-Effective: Compared to traditional repair methods, Aqua Stop offers a cost-effective solution to fix leaks without the need for extensive labor or materials.
  • Easy Application: Applying Aqua Stop is a straightforward process that doesn’t require specialized skills. It can be applied by pool owners themselves, saving time and money.
  • Long-Lasting: Once applied, Aqua Stop creates a durable barrier that withstands the wear and tear of pool usage, ensuring long-lasting results.

Steps to Applying Aqua Stop

Preparation

Before applying Aqua Stop, ensure the pool surface is clean and dry. Remove any debris, algae, or foreign particles.

Application

  • Shake the Solution: Shake the Aqua Stop solution well before use to ensure uniform consistency.
  • Apply the Sealant: Using a brush or roller, apply Aqua Stop directly onto the leaking area. Apply multiple coats if necessary, allowing each coat to dry before applying the next.

Curing

Allow the Aqua Stop sealant to cure for the recommended time before refilling the pool. This ensures the sealant bonds properly and provides optimal leak protection.

Frequently Asked Questions

1. Is Aqua Stop safe for swimmers?

Yes, Aqua Stop is completely safe for swimmers. Once cured, it forms a non-toxic barrier that does not release harmful chemicals into the water.

2. How long does Aqua Stop last?

When applied and cured correctly, Aqua Stop’s effects can last for several years, providing a reliable solution to water leakage.

3. Can Aqua Stop be used underwater?

No, Aqua Stop should be applied to dry surfaces. Make sure the application area is completely dry before applying the sealant.

4. Is Aqua Stop suitable for all types of pools?

Yes, Aqua Stop is compatible with various pool surfaces, including concrete, fiberglass, and vinyl.

5. Can I apply Aqua Stop myself, or do I need a professional?

Aqua Stop is designed for easy application by pool owners themselves. However, if you’re unsure, seeking professional assistance is always an option.

Conclusion

Owning a pool is all about enjoyment, relaxation, and quality family time. However, water leakage issues can take away from this experience. Aqua Stop provides a solution that is not only effective but also affordable and easy to apply. With its advanced technology and long-lasting results, Aqua Stop is a must-have for any pool owner looking to ensure their pool remains leak-free for years to come.

So why wait? Shop now: helloshoponline and say goodbye to water leakage problems, making your pool maintenance hassle-free and enjoyable.

Brands