Pool Circulation
Showing 49–72 of 195 results
-
Pool Circulation, Pool Products
High water level skimmer
High water level skimmer allows high water level in the pool (+/- 4 cm) giving an infinite pool effect.
The water line is located very close to the top of the pool.
Entirely made of AISI-316L. All models are equipped with Ø50 mm overflow and have a housing to mount a water level regulator – item 73453 – not included.
With connection
for equipotential connection.
It also includes flanges for prefabricated pools.
Recommended flow 7.5 m3/h. Basket capacity 1.2 L.EN 13451-1-3
EN 16582-1 y EN 16713-2SKU: HS8458 -
Pool Circulation, Pool Products
Hydrostatic valve
To alleviate pressure which underground water can build up under the pool shell. It is recommended that a hydrostatic valve & drainage tube are fitted to a main drain.
Hydrostatic valve To thread into the bottom of main drain. Made in white ABS with screw and spring in S.S. 1 1/2″.
SKU: HS6321 -
Pool Circulation
Interchangeable basin equipment
Bushing, return inlet, suction nozzle, flange assembly to be installed in concrete, prefabricated and liner pools The measurements of each item make it possible to interchange them with the stainless steel sets.
The inlets can be installed in any bushing with a 1½” BSP thread. There is a flange set to install the inlets in pools with a liner.
All items mainly made in plastic (ABS), except screws and gaskets.
Each item can be assembled with the stainless steel sets. Interchangeable stainless steel/plastic codes.SKU: HS6332 -
-
-
Level Regulators
Level regulator (Auto top-up) for all types of skimmers
Made of ABS. May be connected from the bottom or side, as required. Semi-die cut outlets to the pool so that the most suitable connection can be made. Adjustable lid height and level.
Cover color can be changed using the 15L skimmers covers : 00249-0700CL090, 00249-0700CL129, 00249-0700CL144
SKU: HS7856 -
-
Pool Circulation, Pool Products
Main drain grille for pool standard compliance
Grille to replace the grilles on already installed main drains in private pools, to meet pool regulations. Made of PP plastic.
Compatible with main drains 00270, 00271, 00272, 06474, 27125, 34410 and 07880 for prefabricated pool and with main drains 01467, 27837, 27839 , 00257, 19351for concrete pools.Compliant with EN 16582-1.
SKU: HS3655 -
-
-
-
-
-
-
Pool Circulation, Pool Products
Mini drain
All main drains made in plastic are provided with UV protected grilles.
– Water passing speed 0.5 m/seg
– Maximum suction velocity 1.5 m/seg
– Minimum distance between drains: >2 mMade in white ABS with grille fixed to flange. Suction velocity of grille 0.5 m/sec and max. flow 11 m3/h. Bottom connection with plug or for fitting the hydrostatic relief valve & drainage tube. Slots < 8 mm. Complies with valid standard. M5 threaded screws and brass inserts to secure flange and grille. Can be used in concrete spas and small pools.
Complies with Standards:
EN 16582-1
EN 16713-2SKU: HS4778 -
Inlets
Multiflow return inlet Parker model
MULTIFLOW SYSTEM
The eyeball has been marked with a series of “knock-outs” at 14, 20, and 25, enabling the required flow to be selected at the time of installation.
Recommended max flow 4 m/sec., complies with UNE 13451-1:
Ø 14 mm = 30 m3/h, Ø 20 mm = 4,5 m3/h, Ø 25 mm = 7 m3/h For liner pools, white ABS plastic with gaskets and screws. External threead of 2″, Ø 50 mm solvent internal. Installation with wall conduits 15662 or 15663 is recommended.
Complies with standars:
EN 16582-1
EN 16713-2SKU: HS1991 -
Inlets
Multiflow return inlet polyester pools
MULTIFLOW SYSTEM
The eyeball has been marked with a series of “knock-outs” at 14, 20, and 25, enabling the required flow to be selected at the time of installation.
Recommended max flow 4 m/sec., complies with UNE 13451-1:
Ø 14 mm = 30 m3/h, Ø 20 mm = 4,5 m3/h, Ø 25 mm = 7 m3/h.
Code 00334: 2″ external thread. Ø 50 mm. solvent internal. Made in white ABS.
Code 06481: 2″ external thread. 11/2″ internal thread. In white ABS with gaskets. Slots < 8 mm, complies with UNE 13451-1 standard.
Complies with standards:
EN 16582-1
EN 16713-2SKU: HS4671 -
Inlets
Multiflow return inlet polyester pools
MULTIFLOW SYSTEM
The eyeball has been marked with a series of “knock-outs” at 14, 20, and 25, enabling the required flow to be selected at the time of installation.
Recommended max flow 4 m/sec., complies with UNE 13451-1:
Ø 14 mm = 30 m3/h, Ø 20 mm = 4,5 m3/h, Ø 25 mm = 7 m3/h.
Code 00334: 2″ external thread. Ø 50 mm. solvent internal. Made in white ABS.
Code 06481: 2″ external thread. 11/2″ internal thread. In white ABS with gaskets. Slots < 8 mm, complies with UNE 13451-1 standard.
Complies with standards:
EN 16582-1
EN 16713-2SKU: HS2689 -
Inlets
Multiflow return inlet threated
Multiflow return inlet threated
MULTIFLOW SYSTEM
The eyeball has been marked with a series of “knock-outs” at 14, 20, and 25 mm, enabling the required flow to be selected at the time of installation.
Recommended max flow 4 m/sec., complies with EN 13451-1:
Ø 14 mm = >2.2 m3/h, Ø 20 mm = 4,5 m3/h, Ø 25 mm = 7 m3/h 2″ external thread, Ø 50 mm. Made in white ABS. Can be installed with wall conduits: 15658-15659. Grille slots are < 8 mm. Complies with EN 13451-1.
Complies with standards:
EN 16582-1
EN 16713-2SKU: HS3973