NORMA filter
Laminated filter in polyester reinforced with fibreglass (PRFV). Filtration bed can be of single or multilayer. Maximum working pressure 2.5 kg/cm2. Complies with DIN standard 19643/19605. Collector system with nozzle plate (0.5 mm slot). Fitted with sight glass, sand dump port, lateral manhole, pressure gauge and manual air vent and water purge. Top sand charge lid Ø 200 mm and manhole Ø 200 mm or Ø 400 mm according to model type. PVC and PP internal components. A4 bolts and EPDM gaskets. Options: Interior vinylester coating (resistant to ozone concentrations <0.4 ppm) and maximum temperature of 40ºC. Standard colour: Ivory.
| Code | Description | ||
| 08142 | 10.000 l/h Ø 650 outlets 90-75 mm | ||
| 08143 | 15.000 l/h Ø 800 outlets 90-75 mm | ||
| 08144 | 23.000 l/h Ø 1.000 outlets 140-110 | ||
| 08145 | 34.000 l/h Ø 1.200 outlets 140-140 |
Reasons to buy from helloshoponline
- Guaranteed quality
- Careful handling
- On time delivery
- Support
- Telephone support
- Live chat support
- Trained staff
If you have questions or feedback about an order or plant care here’s how to contact:
- Email :info@helloshoponline.ae
- Phone:+971 50 5454 589
| Brands |
|---|
Related products
-
Sand Filters
CANTABRIC filter
Ivory colour. Injected thermo-plastic shell with built in base. Supplied with pressure gauge, manual air vent, and multiport valve. Maximum filtration velocity: 50 m3/h/m2.Maximum working pressure: 2,5 kg/cm2.
CHARACTERISTICS:
– Available with side mount or top mount, to adapt to the particular characteristics and available space at each pool site.
– Filter body manufactured of chemical-resistant, weatherresistant, inalterable plastic. Designed for outdoor use.
– Standard equipment with 11/2″, 6+1 multiport valve from AstralPool for the 400-mm, 500-mm, and 600-mm diameters or 2″, 6+1 multiport valve for 750-mm diameters, and 2 1/2″, 6+1 multiport valve for 900-mm diameters, with bayonet closure for filter, backwash, rinse, recirculate, waste, close, and winter operations (all inlets and outlets are connected).
– Transparent lid for easier visual inspection and access to the inside of the filter in side-mount valves.
– Collector and diffuser for continuous operation.
– Manual bleeder valve for purging air inside the filter, if necessary.
– Built-in manual bleeder valve for water of 3/4″ in the sand drain plug of the filter for easier drainage without losing sand.
– Sand drain: 1 1/2″ for 400-mm, 500-mm, and 600-mm diameters and 2″ for 750-mm diameter.
– Built-in collector at the bottom to ensure balanced flow and filter backwash.
– Pressure gauge to control filter backwash.
– Built-in base in the lower half of the filter, with holes for correct anchoring to the floor.
– Extra-large 225-mm manhole for easier handling and loading of sand in 900-mm diameters. The upper manhole is 177 mm in the rest of the range.ADVANTAGES:
– Easy to drain. No lost sand, thanks to a manual bleeder valve for water in the sand purge plug.
– Functionality. The advanced technology developed for the Cantabric filters offers extraordinary reliability in operation with low maintenance, allowing the filters to run safely with optimal pool filtering for many years. The equipment also includes the AstralPool 6+1 multiport valve with filter, backwash, rinse, recirculate, waste, and closed positions.
– Innovative design. Apart from functionality, AstralPool is concerned with creating a new image for its Cantabric filters, an approach that has led to a product with an attractive, unique design based on the use of a ivory tone and an innovative shape, while also focusing on adaptability to the needs of location.
– Extensive range. Cantabric filters provide an ideal solution for a wide variety of pool sizes, as they meet the filtering needs of pools between 30 and 240 m3 with flow rates of 6,000 l/h to 30,000 l/h at a filtering rate of 50 m3/h/m2.MONOBLOC:
Top mounted Cantabric monobloc Ø 400 with Sena pump
The Cantabric is now available in a monobloc version! This new equipment eases the installer’s work significantly by providing a compact, reliable solution with an attractive design.
– Includes a sturdy die-cast polypropylene base styled with the same aesthetics as the filter, while also keeping functionality in mind.
– Base is mounted next to the filter (filter continues to rest directly on the floor), thereby completely avoiding the possibility of breakage in the base caused by the filter weight.
– Perfect base-to-filter anchoring using stubs on base.
– The compact unit comes with a 1/3 HP Sena pump (technically speaking, other pumps can also be connected).SKU: HS7292 -
Sand Filters
RODAS filter Ø 1.400 – 1.600 – 1.800
Horizontal Bobbin wound filters are constructed from fibre glass and polyester resin for a maximum working pressure of 2,5 kg/cm2.
The production of these filters is controlled by computer and other specifically designed machines with a large degree of flexibility which allows reinforcing at any stage of manufacture. Excellent relation between the filter weight and its mechanical characteristics. Greater filtering capacity and greater efficiency of filtration.CHARACTERISTICS:
– Resistant to corrosion unlike conventional steel filters.
– Maximum operating temperature: 50ºC.
– Complies with European standards for pressure vessels 97/23/CE included un section 3 of article 3.
– Hydraulic pressure test 1,5 times maximum admissible pressure.
– Resistance and density calculations are based on norms BS-4994 and AD-Merkblatt N1.
– Pressure gauge panel.
– Manual air and water purge.
– Loading access Ø400.
– Air wash connection.
– Internal components and pipe in PVC.
– Collector arms and nozzles in PP.
– Bolts, nuts and washers in AISI 316.
– Seals in EPDM.ADVANTAGES:
– Higher quality water is achieved with their greater filtering capacity. Indexes of turbidity and contaminants of the filtered water are reduced due to their increased retention capacity.
– The time between washings increases proportionally with the height of the underlayer, and there are fewer interruptions of the filtration, and lower water consumption, because the number of washings needed is decreased and there is less erosion of the filtering material.
– Greater efficiency of filtration and washing are obtained from the optimal combination of carbon, sand and gravel recommended for underlayers of 1.2 metres or more, lowering the loss of load and increasing the retention capacity.
– Side opening: For unloading the filtration medium and facilitating access to the interior, can be located in different positions.
– Collectors: Collection system with arms with 0.3 mm slots made of PP and uniformly distributed for correct circulation of the water.
– Less height, greater filtration surface
– Quality filtration and transparency of water
– The AstralPool high performance, horizontal bobbin wound filters are made of polyester reinforced with fibreglass; they are totally anti-corrosive, and have high mechanical, chemical and thermal resistance.OPTIONS:
– Options for side opening placement.
– Inner coating for ozone treatments.
– Peephole Ø135 and Ø400.
– Consult for other options and pressure.SKU: HS3961 -
Sand Filters
BERLÍN filter
Ø 400 mm injected lid. Complete with pressure gauge, water purges, and multiport valve. Maximum filtration velocity 50 m3/h/m2.
CHARACTERISTICS:
– Bobbin-wound sand filters in polyester/fibreglass resin.
– Cover of Ø 240 mm with screw closure, die-injected for diameters up to 900 mm. Cover of Ø 400 mm with screw closure, die-injected for Ø 1050 and Ø 1200 mm.
– Blue satin-finish, with dust protection with a clear polyurethane flash coat for Ø 500, Ø 600, Ø 750 and Ø 900. Blue finish for Ø 1050 and Ø 1200.
– Equipped with collectors and diffuser of highly resistant PVC and PP plastic.
– Fitted with pressure gauge and manual air and water bleeder valves. For models of Ø 900, Ø 1050 and Ø 1200, includes sand drain of 2 1/2″ sand purge.
– Side-mount, 6+1 way selector valve for filter, backwash, rinse, recirculate, waste and closed, except for models of Ø 500, Ø 600 and Ø 750.
– Maximum flow rate: 50 m3/h/m2. – Maximum operating pressure: 2,5 kg/cm2.
– Inner coating of HDPE (polyethylene), blown for Ø 500 and Ø 600mm, thermoformed ABS for Ø 750 and Ø 900 mm, and polyester/fibreglass for Ø 1050 and Ø 1200 mm.
– Filter base manufactured in plastic with diameter up to 750 mm and polyester and fibreglass for larger diameters. Note: Operating pressure of 4 kg/cm2 available by special order.ADVANTAGES:
– Easy access: Owing to the larger diameter of the top manhole (400 mm) for filters of diameter 1050 mm and 1200 mm, the filter interior can be more easily accessed for servicing.
– Improved finish: Apart from its bobbinwound finish, which provides greater resistance and safety, the blue satin-finish distinguishes it from conventional filters.MONOBLOC: Berlin filters of diameter 500 and 600 mm are available in monobloc composed of a polypropylene base, filter with side-mount selector valve, selfpriming Sprint pump and all the necessary fittings. Characteristics:
– The monoblocs include a base constructed of weather-resistant plastic.
– All components are designed for easy assembly and precise fitting.
– Contains pre-assembled unit.SKU: HS3579 -
Sand Filters
EUROPE filter
Polyester and fibreglass filters. Totally corrosion-resistant and resistant to salt water Fitted with pressure gauge panel, manual air relief valve and water purge. Ø 400 mm lid. Ø 200 mm sand discharge port. Suitables for filtration velocities of 20, 30, 40 and 50 m3/h/m2. Please enquire for other velocities. All Europe filters can be fitted with valve manifold. Available models for 1 m and 1.2 m filter bed heigth, and to hold a pressure up to 2.5 bar and 4 bar.
OPTIONS: – It can be connected in a valves battery.
SKU: HS6657
